You are here: Distributor Pompa Air»Archive for October 2014

Archive for October 2014

Ebara-CDX,CDXM- Centrifugal Stainless Steel Pumps

Ebara-CDX, CDXM Series

Stainless steel single impeller centrifugal pumps.
Featuring the one piece volute manufactured using
Ebara’s unique plasma stamping process.


˜ Single stage centrifugal pump, closed impeller.
˜ Maximum working pressure: 8 bar
˜ Maximum liquid temperature: 60 °C (for models 70/05-70/07-90/10)
~90 °C (for other models)


Ebara-CDX-Drawing˜ Pump casing: 304 Stainless Steel
˜ Impeller: 304 Stainless Steel
˜ Casing Cover: 304 Stainless Steel
Shaft: 303 Stainless Steel
˜ Bracket & Motor Frame: Aluminium
˜ Mechanical seal: Carbon/Ceramic/NBR
˜ (wetted part)

Motor Data

˜ TEFC, 2 pole, 50 Hz
˜ Insulation class F
˜ IP55 protection
˜ 1 Phase – 230 Volt
˜ 3 Phase – 230/400 Volt (dual voltage motors)
˜ In built overload protection for 1 Phase


˜ 25 mm Ø discharge
˜ 0.37 to 1.5 kW – 1 Phase
˜ 0.37 to 1.8 kW – 3 Phase
˜ 1.8 m cable with 3 pin plug (1 Phase models only)


˜ 1.8 m cable with 3 pin plug (1 Phase models only)


˜ High temperature seal (110 °C)
(Carbon/Ceramic/Viton seal, Viton O’ Rings)
˜ Hard faced seal (SiC/SiC/Viton seal, Viton O’ Rings)

Performance Curve

3000 rpm

Water temp:
20 °C

of test :
ISO 9906
Annex A

Model Code

CDXM 120/12
Motor Size
Nominal Capacity
(70,90,120 or 200 lpm)
Model CDX = 3 Phase
CDXM = 1 Phase
(M ~ Monophase)


EBARA              GRUNDFOS              KSB             WILO           TSURUMI

Wilo-JP series-Centrifugal Sanitary Pumps

Product Introduction

Wilo-JP series-Centrifugal Sanitary Pumps in all sectors of beverage and food processing industries,

JP series, special feature with unique spiral-shaped casing and the double curved impeller design for high efficiencyhave proven successfully by absolute reliability such as low energy consumption,

perfect CIP and low noise level.


Features / Benefits

Wilo-JP-DIMIdeal for hygienic application of dairy, food, beverage,
pharmaceutical and other industries
Unique spiral-shaped casing for high efficiency
Designed for either CIP or easy manual cleaning
Low NPSH requirement, power consumption, noise level
Up to 100m³/hr flow rate, 80m head
SS316L for all wetted parts & EPDM standard
Single seal standard & easy change to double seal





































EBARA              GRUNDFOS              KSB             WILO           TSURUMI