KSB - Movitec A PumpDrive-vertical, high-pressure centrifugal pump


KSB-MovitecPumpDriveKSB – Movitec A PumpDrive

Multistage, vertical, high-pressure centrifugal pump in ring-section design with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design), close-coupled. ATEX-compliant version available.



Spray irrigation, irrigation, washing, water treatment, fire-fighting and pressure booster systems, hot water and cooling water recirculation, boiler feed systems etc.
6 (LHS), 45, 65

Overview of technical data

Type of bearing Plain bearings
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Type of first impeller Radial
Other impeller types Radial
Type of installation In- line
Type of coupling Direct
Type of lubrication Oil / Product lubrication
Max. permissible fluid temperature 120 °C
Pump set location Dry installed
Stage casing material (EN standard) 1. 4301;1.4404
Suitable for drinking water Yes
Type of stage casing Stage casing with diffuser
UNSPSC classification 4015150300
Casing material (EN standard) 1. 4301;1.4401;JL1040
eClass assignment 36410101
Maximum head 401, 00 m
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Water;Building services
Casing material Chrome nickel steel
Maximum discharge-side pressure 40 bar
Maximum drive rating 45 kW
Type of installation Stationary
Maximum flow rate 75 m³/h
Maximum speed of rotation 2. 900 1/min


EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Grundfos-JP Booster self-priming pump


Grundfos_JP_BoosterThe Grundfos JP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G 1 or Rp 1. The pump has a built-in ejector with guide vanes for optimum self-priming properties.

JP pumps are available in two material variants.

Material variant A:

Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.

Material variant B:

Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.

The robust design makes the pump suitable for fixed installation. The custom-built composite handle is fitted lengthwise.

The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance Single-phase motors have a built-in thermal switch and require no additional motor protection Three-phase motors require external motor protection


Built for a long, trouble-free working life, the small and handy Grundfos jet pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.

When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.

Features and benefits

  • Grundfos JP booster dimSelf-priming
  • Stable operation even if there is air in the liquid
  • Ideal for small water supply systems
  • Compact and handy









 EBARA               GRUNDFOS              KSB         TSURUMI         WILO






• Irrigation
• Drainage
• General purpose





• No priming is required except for initial use
• Special design of casing provides very rapid priming for extended piping
• Maintenance is facilitated due to packing type
• Water mixed with a little sand or mud can be pumped up due to semi-open impeller design
• Easy installation with engine for belt driven due to c.c.w rotation




Impeller type:

Impeller SQPB














LiquidTemperaturesReg. NPSHRotation










Stuffing box


Fresh water, river water, rain water0~40°C4mCounter clockwise when viewed from drive end




Cast iron Bronze

Cast iron Bronze

Carbon steel Stainless steel





Sealed ball bearing

Sea water 







Stainless steel


Ebara-SQPB for sea water

SQPB-Sea water











 EBARA               GRUNDFOS              KSB         TSURUMI         WILO


Tsurumi - BX submersible pump Explosion proof


Tsurumi – BX submersible pump Explosion proof

The BX-series is the explosion–proof type of the B-series and is available for operating in an area in which an explosive atmosphere occurs occasionally. The pump conforms to the relevant EU directives and is certified by ATEX II 2 G Ex d IIB T4 standard.



  1. Transferring sewage and wastewater to wastewater treatment plant
  2. Dewatering wastewater from industrial plant (e.g. petrochemical plant, etc)
  3. Pumping wastewater from collection sump where explosive atmosphere is likely to present



Tsurumi-BX Series-ImpellerFlame proof according to ATEX An impeller having a wide channel extending from inlet to exit,

which prevents internal clogging by

solids sucked in via the inlet.



Tsurumi BX-explosion-proof-sewage-pumpsElectric submersible pump
Explosion proof according to ATEX 94/9/EC
II 2G Ex d II B T4.
Channel impeller
Impeller passage 47mmx53mm
Suitable for waste water and liquids carrying
waste and solid matters


Electric Motor

Dry-type submersible induction motor,
Insulation class F, 4 poles, 1420 r.p.m.
Direct on line start
Voltage: 400V, 50Hz, 3-phase
Power input: 3,00kW
Power output: 2,30kW
Nominal current: 5,4A
Start current: 33,1A
Electric Cable
10m H07RN6GX1,5mm2
Motor Protection
Miniature protector in windings
(snap-action bi-metal device)
Shaft Seal
Double mechanical seal in oil bath
additional lubrication by oil lifting device
Primary Seal:
silicon carbide on silicon carbide
Secondary Seal:
ceramic on carbon



Shielded ball bearings, maintenance-free


ø Discharge bore mm

Pumping Fluid Temperature
Type of Fluid
Municipal sewage
Pump Compo- nents Impeller
Non-clog impeller
Shaft Seal
Double mechanical seal
Shielded ball bearings
Material Impeller
Grey iron casting EN-GJL-200
Grey iron casting EN-GJL-200
Suction Plate
Grey iron casting EN-GJL-200
Shaft Seal
Silicon carbide in oil bath
Motor Type, Poles
Induction motor, 2 poles, 
IP68, Induction motor, 4 poles, IP68
Turbine oil (ISO VG32)
Insulation class F
Motor Protector (built-in)
Circle thermal cut-out
Phase / Voltage
3-phase / 400V / 50Hz / d.o.l.
Material Casing
Grey iron casting EN-GJL-200
Stainless steel EN-X30Cr13
Rubber, 10m H07RN6G
Discharge Connection
Inside thread, JIS10K flange
Optional Accessories
Guide rail fitting "TOS" 
(guide support, duck foot bend,
 lifting chain)
/Bend and stand set for free standing types

 EBARA               GRUNDFOS              KSB         TSURUMI         WILO

Wilo-Multivert-MVIE - Vertical multistage centrifugal with integrated frequency converter



Wilo-Multivert mvie-403Non-self-priming multistage pump with
integrated frequency converter


• Water supply and pressure boosting
• Industrial circulation systems
• Process engineering
• Cooling water circulation systems
• Washing and sprinkling systems

Q max.

145 m³/h

H max.

245 m


Technical data

• Fluid temperature -15 to +120 °C
• Operating pressure max. 16 bar/25 bar
• Inlet pressure max. 10 bar
• Protection class IP 54 or IP 55



• Stainless steel pump in in-line design
• PN 16 with oval flanges
• PN 16/25 with DIN round flanges,
Victaulic connections depending on
pump type
• Single-phase or three-phase current
standard motor
• Integrated frequency converter
• Integrated thermal motor protection
• Protection against low water level



Special features

• Easy commissioning
• Full motor protection
• Large control range
• MVIE 2..-16..-6
All parts that come in contact with the
fluid made of stainless steel 1.4301
(AISI 304) or 1.4404 (AISI 316L)
• MVIE 16..-95..
depending on pump type in stainless
steel 1.4404 (AISI 316L) or 1.4301 (AISI
304) with pump housing made of grey
cast iron EN-GJL-250, cataphoretic
• All relevant components have KTW and
WRAS approval


EBARA            GRUNDFOS            KSB            WILO          TSURUMI

KSB-Rio C Hot water heating systems and heat recovery systems



KSB-Rio C Hot water heating systems and heat recovery systems



Maintenance-free, glandless wet rotor pump, screw-ended, with three speed levels.




Hot water heating systems, heat recovery systems and cooling circuits in air-conditioning systems.



Overview of technical data

Type of bearing Plain bearings
Drive Electric motor
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230 V, 1~
Impeller material (EN standard) KUNSTSTOFF
Type of installation In- line
Type of coupling None
Type of lubrication Oil / Product lubrication
Max. permissible fluid temperature 110 °C
Nozzle position In- line
Maximum rated pressure (discharge) PN 10
Pump set location Dry installed
Shaft material (EN standard) EDELSTAHL X40 CR13
Suction characteristics Non- priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Closed / Radial;Closed
Type of connection Thread
UNSPSC classification 4015150300
Casing material (EN standard) EN- GJL-200
eClass assignment 36410101; 36410100;36410000;36410105
Maximum head 5, 60 m
Minimum head 0, 25 m
Installation position Any
Shaft seal type Seal- less
Main applications Building services; Water
Casing material Cast iron
Maximum discharge-side pressure 10 bar
Maximum drive rating 0. 10 kW
Type of installation Stationary
Maximum flow rate 3, 60 m³/h
Maximum speed of rotation 2. 200 1/min


EBARA            GRUNDFOS            KSB            WILO          TSURUMI

Grundfos-Unilift CC - Submersible drainage pump




Grundfos-Unilift CC-modularThe Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.



The Unilift CC is designed for the pumping of the following:

  • Water and rainwater in horticulture
  • Water from rivers and lakes
  • Rainwater, drainage water and water from flooding
  • Water for filling/emptying containers, ponds, tanks, etc.
  • Effluents from showers, washing machines and sinks below sewer level
  • Pool water
  • Ditch drainage water
  • Groundwater (lowering applications)
  • Effluents from viaducts, underpasses, etc.
  • Drainage water from garage sprinkler systems.

 Grundfos Unilift-CC-Curves

Features and benefits

  • Composite materials
  • Stainless steel strainer
  • Self-venting valve in handle
  • Available with level switch
  • Suitable for low suction levels
  • Light-weight.








EBARA            GRUNDFOS            KSB            WILO          TSURUMI

Ebara - DF - Submersible Sewage Non-clog Pumps



Ebara – DF Submersible Sewage Pumps 

Ebara-DF-Drawing copySubmersible sewage pump withnon-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrou s matter. Suitable for sewage, waste water, led lighting storm water drainage, etc. 










 Performance curves



Robust cast iron construction with non-clog semi open impeller.  Suitable for:

  • Waste water
  • Treated water
  • Effluent
  • Storm water
  • Municipal or industrial drainage
  • Fountains and water displays


Ebara Submersible pump with non-clog
semi open impeller
˜ Maximum solids handling: refer to table

Motor Output: 1.5 to 3.7 kW (3ph) Manual only
Outlet Size: 65 to 80 mm
Flow Rates: 100 to 1200 lpm
Head: 3 to 18 m
Max Liquid temp: 40oC
Max. immersion: 8m
Max. solids: 40 or 46 mm#
# depending on model


Pump casing: Cast Iron
˜ Impeller: Cast Iron
˜ Suction cover: Cast Iron
˜ Shaft: 403 Stainless Steel
˜ Motor frame: Cast Iron
˜ Fasteners: 304 Stainless Steel
˜ Mechanical seal:

˜ Air filled, dry submersible, 4 pole, 50 Hz
˜ Insulation class F
˜ IP68 protection
˜ 3 Phase – 400 Volt
˜ In built overload protection


EBARA            GRUNDFOS             KSB            WILO           TSURUMI

Tsurumi - SFQ Series Corrosion resistant pumps




Tsurumi – SFQ Series



Tsurumi corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series, SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications


Dimensions in mm:



Stainless steel pump – The SFQ pump has been developed exclusively for corrosive liquids. Applying austenitic steel in all wetted parts, the SFQ pump is a highly specialised pump in terms of design and materials


Performance curves












ø Discharge bore mm 50mm, 80mm
Pumping Fluid Temperature 0-40°C
Type of Fluid Aggressive sewage
Pump Compo- nents Impeller Open type impeller
Shaft Seal Double mechanical seal
Bearings Shielded ball bearings
Material Impeller Stainless steel casting DIN GX5CrNiMo19-11-2
Casing Stainless steel casting DIN GX5CrNiMo19-11-2
Suction Plate Stainless steel casting DIN GX5CrNiMo19-11-2
Shaft Seal Silicon carbide in oil bath
Motor Type, Poles Induction motor, 2 poles, IP68
Lubrication Turbine oil (ISO VG32)
Insulation Insulation class E, Insulation class F
Motor Protector (built-in) Circle thermal cut-out
Phase / Voltage 3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d.
Material Casing Stainless steel casting DIN GX5CrNiMo19-11-2
Shaft Stainless steel EN-X5CrNiMo17-12-2
Cable Rubber, 10m H07RN-F
Discharge Connection Inside thread, JIS10K flange

Dimensions – guide rail fitting type in mm





















EBARA            GRUNDFOS             KSB            WILO           TSURUMI


Wilo-FLA - Multi-pump pressure boosting systems


 Wilo-FLA – Multi-pump pressure boosting systems



Wilo-FLA-Dia1Pressure boosting system for fire extinguisher applications with 1 to 2 autonomous working, non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel










For supply of fire extinguisher water from
fire hose reels according to DIN 14462
from 04/2009

Wilo-FLA-CurvesQ max.

80 m³/h

H max.

130 m

Technical data

• Mains connection 3~230/400 V, 50 Hz
• Fluid temperature max. 50 °C
• Max. operating pressure 16 bar
• Inlet pressure 6 bar
• Protection class IP 54



wilo-helix-V modular• 1 to 2 pumps per system
• Components that come in contact with
fluid are corrosion-resistant
• Galvanised base frame with heightadjustable
vibration dampers for
insulation against structure-borne noise
• Pipework in stainless steel 1.4571
• Gear-operated shut-off ball cock/
annular shut-off valve on every pump,
on suction and pressure sides
• Non-return valve, on pressure side
• Diaphragm pressure vessel 8 l, PN 16, on
pressure side
• Pressure sensor, on discharge side
• Comes as standard with pump
protection by means of minimum
volume acceptance via bypass switch
without auxiliary energy.


Special features

• Compact system in accordance with all
requirements of DIN 1988
• 1 or 2 high-pressure multistage
centrifugal pumps Helix V series with
IE2 motors
• Variants
–Single-pump system
–Twin-pump system with two
independent single-pump systems in
a base frame
• Comes as standard with pump
protection by means of minimum
volume acceptance via bypass switch
without auxiliary energy.


EBARA            GRUNDFOS             KSB            WILO           TSURUMI

Pages:« Prev12345...1920Next »