You are here: Distributor Pompa Air»Domestic Pumps

Domestic Pumps

Domestic Pumps

Grundfos-JP Booster self-priming pump

Overview

Grundfos_JP_BoosterThe Grundfos JP pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G 1 or Rp 1. The pump has a built-in ejector with guide vanes for optimum self-priming properties.

JP pumps are available in two material variants.

Material variant A:

Cover plate, motor stool and base plate in one unit. The handle is fitted crosswise. Both elements are made of composite material.

Material variant B:

Stainless steel cover plate, aluminium motor stool and stainless steel base plate, all separate parts.

The robust design makes the pump suitable for fixed installation. The custom-built composite handle is fitted lengthwise.

The pump is directly coupled to a special fan-cooled asynchronous Grundfos motor that is adapted to the pump performance Single-phase motors have a built-in thermal switch and require no additional motor protection Three-phase motors require external motor protection

Applications

Built for a long, trouble-free working life, the small and handy Grundfos jet pump is suitable for a wide variety of water supply and transfer duties in home, garden and hobby applications as well as in agriculture, horticulture and small-scale service industries.

When used in combination with a pressure control or tank, the JP pump is ideal for small water supply systems.

Features and benefits

  • Grundfos JP booster dimSelf-priming
  • Stable operation even if there is air in the liquid
  • Ideal for small water supply systems
  • Compact and handy

 

 

 

 

 

 

 

 

 EBARA               GRUNDFOS              KSB         TSURUMI         WILO

Grundfos-Unilift CC - Submersible drainage pump

 

 

Overview

Grundfos-Unilift CC-modularThe Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.

 

Applications

The Unilift CC is designed for the pumping of the following:

  • Water and rainwater in horticulture
  • Water from rivers and lakes
  • Rainwater, drainage water and water from flooding
  • Water for filling/emptying containers, ponds, tanks, etc.
  • Effluents from showers, washing machines and sinks below sewer level
  • Pool water
  • Ditch drainage water
  • Groundwater (lowering applications)
  • Effluents from viaducts, underpasses, etc.
  • Drainage water from garage sprinkler systems.

 Grundfos Unilift-CC-Curves

Features and benefits

  • Composite materials
  • Stainless steel strainer
  • Self-venting valve in handle
  • Available with level switch
  • Suitable for low suction levels
  • Light-weight.

 

 

 

 

 

 

 

EBARA            GRUNDFOS            KSB            WILO          TSURUMI

Grundfos- SB and SBA pump is a submersible booster pump

 

 

Overview

Grundfos-SB_SBA1The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:

 

 

SB

The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.

 

 

Features and benefits

  • Grundfos_SB-SBA_CurvesFlexible selection – Pump + controller
  • Complete control and monitoring
  • Easily accessible controller – for service & replacement

SBA

The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

 

Features and benefits

  • Easy selection – one unit
  • Easy installation – one unit
  • Flexible installation – no controller inside the house

 

All SB and SBA pumps are available in two main variants

  • With integrated suction strainer (1 mm mesh)
  • Or with side inlet/flexible suction hose with floating suction strainer (1 mm mesh).

 

All variants are available with or without float switch:

The float switch offers automatic operation and dryrun protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

 

Applications

Grundfos_SBAThe SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

 

Features and benefits

  • Noiseless operation
  • High reliability
  • Integrated protection.
  • Floating suction strainer
    The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.

 

Additional features of the SBA:

  • Simplicity – all-in-one unit
  • Easy installation – no external control unit
  • Integrated dry-running protection
  • Automatic restart after dry-running
  • Lifting eye

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-Pressure Manager (PM1, PM2) Domestic water supply and booster systems

 

 

Overview

grundfos-PM1&2The all-in-one Grundfos Pressure Manager is an intelligent waterworks that controls your pump in accordance with consumption in domestic water supply and booster systems.

The Pressure Manager covers all needs in both simple and complex applications.

This Grundfos-developed, state-of-the-art product offers our well-known quality and our special touch with respect to innovative features and functionality, system integration, plug-and-pump convenience, and ease of use.

Pressure Manager offers a choice of two excellent models: the PM1 for basic flexibility, and the PM2 for all-round control.

 

 

Applications

PM 1 – BASIC FLEXIBILITY

CM_Booster_PM1The PM1 is suitable for applications where start/stop of the pump according to consumption is required. It is the basic flexibility solution, offering pump start at 1.5 or 2.2 bar.

The PM1 starts the pump when the starting pressure is reached, and keeps running as long as there is flow.

The PM1 provides dry-running protection and a cycling alarm for increased safety. In addition, it boasts the usual Grundfos quality, which guarantees high flexibility, robust electronics, and long life.

 

 

 

 

PM 2 – ALL-ROUND CONTROL

Grundfos-CM-PM2The PM2 is the all-round control solution, offering adjustable pump start at 1.5 to 5 bar. This enables customisation to different types of installation and desired comfort levels. The start pressure is set inside the unit, whereas current pressure is read on the intuitive LED display on the front of the Pressure Manager.

The PM2 starts the pump when the starting pressure is reached, and keeps running as long as there is flow.

The PM2 is equipped with an internal pressure tank to minimise starts and stops in the event of leakage in the installation.

In addition, the PM2 can be optimised for operation with a large external pressure tank by enabling the 1-bar differential pressure function. This significantly reduces the number of operating hours of the pump in installations with a pressure tank.

 

Features and benefits Grundfos Booster Pump

  • User-friendly interface
  • Free choice of installation position
  • Flexible power supply
  • Rotary outlet connection
  • Protective functions
  • Adaptability
  • Internal pressure tank (PM 2)
  • Suitable for power supply from petrol generators
  • Power-on indication
  • Pump running indication
  • Alarm indication
  • Dry-running protection
  • Rotary outlet connection.

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-Unilift KP - Stainless steel drainage pump

 

 

Grundfos-Unilift-KPOverview

Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.

The Unilift KP is a single-stage drainage pump with semi-open impeller, designed for the pumping of drain water and grey wastewater. All Unilift KP pumps can be supplied with or without a level switch. The variants are designated as A, AV or M, for automatic or manual operation. The Unilift KP-AV variant for narrow pits is supplied with a non-return flap valve for installation in the outlet. The strainer is clipped onto the pump housing.

The Unilift KP. Single-stage, submersible, stainless steel drainage pump in a robust design with upward-pointing discharge port positioned on the top of the pump.The outer casing is made in one piece. The mains cable and the cable of the level switch are both connected to a single, vulcanized, water-tight plug which is inserted in a socket on the hermetically-sealed stator housing. The motor is a single- or three-phase synchronous canned motor with liquid-filled rotor chamber and water-lubricated bearings.

The motor is cooled by the pumped liquid flowing around it.

  • Enclosure class: IP 68
  • Insulation class: F

 

The motor incorporates automatic overload protection which cuts out the motor in the event of overload. When it has cooled to normal temperature, the motor restarts automatically.

Applications

Grundfos_Unilift_KP_CurvesThe Grundfos Unilift KP pumps are designed for the pumping of:

  • Water and rainwater in horticulture
  • Water from rivers and lakes
  • Rainwater, drainage water and water from flooding
  • Water for filling/emptying containers, ponds, tanks, etc.
  • Effluents from showers, washing machines and sinks below sewer level
  • Pool water
  • Ditch drainage water
  • Groundwater (lowering applications)
  • Domestic effluents from septic and sludge-treating systems
  • Effluents from viaducts, underpasses, etc.
  • Drainage water from garage sprinkler systems.

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

 

EBARA-VERTICAL IN-LINE CENTRIFUGAL PUMPS-LPDA

 

 

 

EBARA VERTICAL IN-LINE CENTRIFUGAL PUMPS LPDA

Print project(2)Feature
– Compact and lightweight.
– Easy removal and maintenance, BPO ( Back pull out) system allows all rotating
elements to be removed without disconnecting suction and discharge pipe work.
– Suction and discharge flanges being of the same diameter and arranged opposite each
other can be directly mounted into the pipe work.
– Non-overload design to ensure stable performance for all applications.
– Wide range application with flow capacity up to 10 m3/ min.
– Higher working pressure up to 16 bars.

SPECIFICATIONS
Description Standard
Liquid handled
Type of Liquid : Fresh Water
Temperature : 0 ~ 100 0C
Max. Positive suction pressure : 10 bar
Max. Discharge pressure : 16 bar
Approximation speed : 1450 min-1
Location : Indoor / Outdoor
Covering Range
Suction Dia. : 100 to 200 mm
Flow rate : 24 to 600 m3/ h
Power : 1.5 to 75 kW
Construction
Pump Type : Inline
Casing split : Vertical back pull out
Impeller : Enclosed
Shaft seal : Mechanical Seal
Shaft : Stub Shaft
Sealing : Self flushing
Material
Casing : Cast Iron
Impeller : Bronze
Shaft : SUS 304 stainless steel
Mech. Seal : Ceramic/ Carbon
Motor Casing : Aluminum
Flanges
Suction : DIN PN-16
Discharge : DIN PN-16
Motor :
Type : IEC Standard, Flange Mounted type
No. of pole
Synchr. Speed : 4
Insulation class : 1500 min-1
Protection : F
Volt/ Phase/ Hz : IP 54 / IP 55
380V / 3 Phase / 50 Hz

Specification
Size : 100
Model : 100LPD4GA
Output ( Kw) : 1.5
Motor Frame Size : 90 L
Weight ( Kg) : 70

Specification
Size : 100
Model : 100LPD4GA
Output ( Kw) : 2.2
Motor Frame Size : 100 L
Weight ( Kg) : 80

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos - SP-Submersible Pumps

 

 

Grundfos SP submersible pumps

Grundfos SP8_93Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

  • Groundwater supply to waterworks
  • Irrigation in horticulture and agriculture
  • Groundwater lowering
  • Pressure boosting
  • Industrial applications.

 

Features and benefits

  • State-of-the-art hydraulics provide high efficiency and low operating costs
  • 100 % stainless steel inside and outside
  • Sand resistant
  • Resistant to aggressive water
  • Motor burnout protection
  • Dry-running protection
  • Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
  • High efficiency
  • Corrosion-resistant
  • Complete range of pumps and motors

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-CMV

 

 

 

 

  • Overview

grundfos-CMV-1The vertical, multistage CMV pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.

The pumps are of the close-coupled type, with a mechanical shaft seal.

The Grndfos CMV pumps are available with cast-iron base and discharge part whereas the remaining wetted parts are made of stainless steel (AISI 304/DIN 1.4301).

Applications

While each Grundfos CMV pump can be customised to meet individual requirements, the pump family is designed to be used in a wide variety of applications.

These include

  • Pressure-boosting systems
  • Domestic water supply systems
  • Cooling systems
  • Air-conditioning systems
  • Horticultural irrigation systems
  • Small industrial applications.

grundfos-cmv-325131_6bFeatures and benefits

  • Compact design
  • Modular design/customised solutions
  • High reliability
  • Low noise level
  • High-performance hydraulics
  • Grundfos motor

 

 

 

 

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

UZ Series

 

 

Tsurumi_UZ_seriesFeatures a vortex impeller and wide pump casing interior, effectively pumping and discharging water containing solids and fibrous foreign matters.

 

 

 

 

 

 

 

 

 

 

 

UZ_curve_ALL2 (1)

 

Recessed vortex impeller

Wide pump casing

Dual silicon carbide faced seals eliminate spring failure due to corrosion or abrasion

High tensile stainless steel shaft to handle full load operation

Oil lifter to maintain seal face lubrication when oil falls below rated volume

Model

Discharge Size (in.)

Motor Output (HP)

S.S. Revolution

Voltage (V)

Weight – Freestanding (lbs.)

Weight – TOS Model (lbs.)

100UZ411

4

15

1800

208/230/460

403

379

100UZ43.7

4

5

1800

208/230/460

174

154

100UZ45.5

4

7.5

1800

208/230/460

323

299

100UZ47.5

4

10

1800

208/230/460

342

317

50UZ41.5

2

2

1800

208/230/460

115

110

80UZ41.5

3

2

1800

208/230/460

146

123

80UZ411

3

15

1800

208/230/460

378

374

80UZ42.2

3

3

1800

208/230/460

146

126

80UZ43.7

3

5

1800

208/230/460

159

139

80UZ45.5

3

7.5

1800

208/230/460

288

278

80UZ47.5

3

10

1800

208/230/460

304

294

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Grundfos CM, CME Booster

Grundfos CM, CME

 

Overview

Modern technologies have brought a high degree of comfort to people within their homes by providing a strong water supply. Grundfos offers complete tailored pressure boosting systems for domestic water supply that ensure optimal water pressure for household applications.

CM Booster, CME Booster comes in different versions:

  • CME Booster
  • CM Booster PM2
  • CM Booster PM1
  • CM Booster PT
  • CM Booster PS

 

The Grundfos CME Booster provides constant water pressure for a variety of domestic applications. This means that the end-user is no longer bothered by fluctuations in water pressure due to a rise or fall in demand, or from pump starts and stops. CME Booster keeps the pressure within the home up regardless of usage. The constant pressure feature provides the benefit of increased comfort.

In addition the CME Booster makes it possible to personalise the water pressure. By the touch of a button the pressure level is increased or decreased as desired.

Features

  • Constant pressure via integrated speed control
  • Compact
  • Robust, stainless steel
  • Easy installation
  • Dry-running protection
  • Low noise, 55 dB

Grundfos has taken the mystery out of controlling variable water pressure for the end-user. With a CM Booster PM2 complex operation and cryptic parameters are a thing of the past. The CM Booster combined with the PM2 provides adjustable pressure settings. The end-user is in control with regards to selecting the water pressure he prefers for pump start-up.

Features

  • Grundfos CM Centrifugal ModularCompact
  • Easy installation
  • Automatic resetting of alarms
  • Adjustable pressure settings
  • Dry-running protection
  • Anti cycling (leakage detection)
  • Maximum continuous operating time

The Grundfos CM Booster PM1 is a compact booster set for water supply in domestic applications. The pressure booster consists of a Grundfos CM pump and a Grundfos Pressure Manager PM1. The pressure manager allows the pump to start and stop automatically according to demand and protects the pump from dry-running.

Features

  • Compact
  • Easy installation
  • Automatic resetting of alarms
  • Adjustable pressure settings
  • Dry-running protection
  • Anti cycling (leakage detection)
  • Maximum continuous operating time

The Grundfos CM Booster PT is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where small leakages are expected to occur.

The booster system consists of a Grundfos CM pump, a pressure tank and a pressure switch assembled into one unit.

The tank is delivered with the product and is easily connected to the CM pump. The system is now ready for use, with preset start pressure and compliant tank precharge pressure.

The pressure band is approximately 1 bar.

When the system has been connected to the pipework, it is all a matter of inserting the plug into a power supply socket, and the system is operational.

Features

  • CM pump
  • Pressure tank to minimise the number of pump starts
  • Motor protection (single-phase only)
  • Automatic operation.

The Grundfos CM Booster PS is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where small leakages are expected to occur.

The booster system consists of a Grundfos CM pump, a 5-way valve and a pressure switch. A pressure tank must be fitted to complete the booster system.

Use your own pressure tank or order one of the Grundfos GT-tanks that make a perfect fit for your booster system.

The pressure band is approximately 1 bar.

When the system has been connected to the pipework, it is all a matter of inserting the plug into a power supply socket, and the system is operational.

Features

  • CM pump
  • pressure tank to minimise the number of pump starts
  • motor protection (single-phase only)
  • automatic operation.

Applications

  • in private homes
  • in summer houses and weekend cottages
  • on farms
  • in market gardens and other large gardens.
  • Blocks of flats
  • Schools
  • Small hotels or guest houses
  • Small office buildings

The pump is suitable for pumping of potable water and rainwater.

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI