You are here: SUKMA Tirta Persada - Distributor Pompa Air».GRUNDFOS Pumps

.GRUNDFOS Pumps

Grundfos SEG – Grinder Pumps

 

 

Grundfos grinder pumps (SEG) are specifically designed for areas with no sewer systems or areas where gravitation systems are unsuitable.

grundfos_seg_modularThe high discharge pressure enables transfer of effluents and sewage over longer distances to the public sewer or sewage treatment plant.

Variants

The SEG range comprises models for single-phase or three-phase voltage supply. All types are designed for voltage tolerances of –10%/+6%.

Pumped liquid

The SEG pumps are suitable for pumping domestic sewage and other liquids with a pH value of 4 to 10 in permanent installations. The SEG pumps are designed for fully submerged continuous operation or partly submerged intermittent operation with a maximum of 20 starts per hour.
In order to protect the grinder system, the pumped liquid must be free from mechanically wearing particles or abrasives such as sand or gravel.

 

Maximum temperature of pumped liquid: 40°C.
For short periods, maximum one hour, up to 60°C is permissible (non-Ex versions only).
Ambient temperature limitations: 40°C
Maximum submersion: 20 m
For information on the actual prefabricated pit ‘PUST’ please click the link below.

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-Aerojet

 

Overview

aerojet-shemaThe AeroJet is a self-aspirating aerator that keeps aerobic treatment processes running and also helps to avoid odour problems in wastewater storage, as anaerobic zones can be eliminated.

AeroJets are a flexible way of providing both mixing and aeration with the same device. AeroJets are easy to install, operate and maintain, as they do not require any blowers, air distribution piping or control valves.

The flexibility of the AeroJet offers distinct advantages for upgrading aeration capacity to meet increased oxygen demands. It can be used either alone or as a supplement to existing aeration equipment.

AeroJets are available in many different sizes to ensure that all needs can be met, no matter what the size and shape of the tank.

Applications

AeroJets are ideal in applications where aeration is needed to enhance biological processes, to avoid odour problems, or to supply oxygen in:

  • Municipal or industrial WWTP
  • Stabilisation and equalisation tanks
  • Fish farms

Grundfos-Aero-Jet

 

Or in applications where flexible oxygen supply is essential:

  • Refurbishment of treatment plants
  • Boosting oxygen supply at peak loads
  • Avoiding oxygen depletion in lakes or channels

 

 

Features and benefits

  • Handles both aeration and mixing
  • Self-aspirating aerator – no need for additional air distribution pipes, blowers or valves
  • Submerged aerator increases oxygen transfer time
  • Submerged installation reduces noise and limits aerosol formation at the tank
  • Available as a free-standing unit or with the pump on an auto-coupling
  • Can easily be installed or repositioned even while processes are running
  • Fit all tanks, regardless of size and shape
  • Made completely in stainless steel for strength
  • Fed by a submersible wastewater pump of the SL, SE or S types
  • Large free passage – no clogging

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-NB, NBG, NBE, NBGE

 

Overview

Grundfos-NBGrundfos end-suction pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.
Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC and irrigation.

The Grundfos NB/NBG pumps are all non-self-priming, single-stage, centrifugal volute pumps with axial suction port, radial discharge port and horizontal shaft. The NB/NBG range consists of close-coupled pumps with their main dimensions in accordance with either EN733 or ISO2858.

Applications

Grundfos-NBEGrundfos offers a virtually limitless range of close coupled (NB) end-suction pumps. Their sturdiness and reliability make them ideal for use in demanding environments such as the following:

  • District heating plants
  • Heating systems for blocks of flats
  • Air-conditioning systems
  • Cooling systems
  • Wash down systems
  • Other industrial systems.

 

Features and benefits

  • Optimised hydraulics in housing and impeller = unimpeded liquid flow
  • O-ring seal between pump housing and cover = no risk of leakage
  • Housing, impeller and wear ring in different materials = improved corrosion resistance, no sticking elements
  • Pump is CED coated to increase corrosion resistance
  • Available with IE1, IE2 and IE3 motors
  • Available in a number of shaft seal and material variants
  • PN 10,16 and 25 bar
  • For temperatures up to 140 °C.

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-TP Vertical in line pump

 

 

Grundfos-TP Vertical in line pump

Grundfos-TPm

 

Grundfos vertical in-line volute pumps are used in a number of applications including air conditioning and heating. The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals.

The pumps are close-coupled, meaning that the pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid compared to similar canned rotor pumps.

Max flow: 4,500 m3/h
Max motor size: 630 kW

 

 

 

Main product characteristics

  • Optimised hydraulics for high efficiency
  • Low noise level
  • High efficiency motors (EFF1) as standard
  • Top-pull-out design for easy dismantling during service
  • Mechanically and hydraulically balanced impeller to increase motor bearing and shaft seal lifetime
  • The entire pump is electro-coated to increase corrosion resistance
  • Available in single and twin pump design
  • Available in a number of shaft seal and material variants
  • PN 6,10, 16 and 25 bar.
  • Temperature up to 150C

1348746847452

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-Digital dosing-DME

Grundfos-DME-modular

Overview

Grundfos DME Digital Dosing pumps combine perfect precision with user-friendliness, covering large dosing quantities in the range from 60 l/h to 940 l/h with few variants.

Digital Dosing

The use of stepper motor/EC drives optimizes control of the stroke speed and makes it extremely accurate. The duration of each pressure stroke varies according to the flow setting. The suction stroke time always remains constant but can be lengthened using the anti-cavitation function and thus adapted to the relevant needs. This way suction always takes place with the full stroke volume. This results in continuous dosing and lower pulsation in the dosing system – important factors in ensuring smooth pumping of outgassing media and in installations requiring longer suction lines.

The DME pump range has all the benefits of the highly acclaimed smaller Digital Dosing range, making accurate dosing easier than ever.

Precise and easy setting

The operator can easily install and set the pump to discharge exactly the quantity of dosing liquid required in the application. In the display, the setting of the pump is read out directly in ml/h or l/h, pulse or batch. The operation mode is easily identified by means of icons.

Turndown ratio 1:800

With a turndown ratio ten times better than that of traditional equipment, the DME Digital Dosing pumps offer maximum flexibility and accuracy.

Turndown of the suction stroke to 75 %, 50 % or 25 % of the maximum speed ensures optimal priming and displacement of even the most difficult liquids.

Unique technology

A unique drive technology and microprocessor control make sure that liquids are dosed precisely and with low pulsation, even when the pump is operating with high viscosity or degassing liquids. Instead of the conventional stroke length adjustment, the capacity of the DME is regulated by automatic adjustment of the motor speed during the discharge stroke, and by fixed suction stroke speed. This guarantees optimal and uniform mixing.

grundfosdosing

Fieldbus communication

Available with Profibus interface to supply performance data and status information for quality control, preventive maintenance and future reference.

Overload protection

Built-in overload protection monitors the counter-pressure of the pump and protects it against too high pressure loads.

Switch-mode power supply

The switch-mode power supply makes sure that Grundfos DME Digital Dosing pumps can be used worldwide within the 100-240 VAC – 50/60 Hz range.

Several material variants

The dosing heads of DME pumps are available in stainless steel, PVDF, and environmentally friendly, cost-efficient polypropylene.

Processes:

Dosing of biocides and chemicals, belt lubricant for conveyor equipment diverse range of acids, lyes, flocculation and coagulation agents, cationic and anionic polymers with very different viscosities, precipitating agents and disinfectants, CIP applications

Applications

  • Pulp and paper industry
  • Textile industry
  • Food and beverage industry
  • Industrial process water and waste water treatment
  • Drinking water treatment

Features and Benfits

  • Digital Dosing
  • Ratio 1:800
  • High precision – unique technology
  • Dosing of high viscosity media
  • Robustness and reliability

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos - SP-Submersible Pumps

 

 

Grundfos SP submersible pumps

Grundfos SP8_93Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

  • Groundwater supply to waterworks
  • Irrigation in horticulture and agriculture
  • Groundwater lowering
  • Pressure boosting
  • Industrial applications.

 

Features and benefits

  • State-of-the-art hydraulics provide high efficiency and low operating costs
  • 100 % stainless steel inside and outside
  • Sand resistant
  • Resistant to aggressive water
  • Motor burnout protection
  • Dry-running protection
  • Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
  • High efficiency
  • Corrosion-resistant
  • Complete range of pumps and motors

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-DWK Dewatering and drainage pump applications

 

 

 

1347964478311

DWK and DPK are submersible pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

 

 

 

 

Applications

DWK/DPK are excellent pumps for dewatering and draining applications. The combination of compact design with high-pressure capability makes the pumps suitable for use in pits, whether for temporary or fixed installation. The installation design options provide the flexibility needed to cover many needs. Applications include:

  • Construction sites
  • Excavations
  • Tunnels
  • Fish ponds
  • Drainage pits.

 

Grundfos-DWK-service_1

Features and benefits

  • Durability
  • High efficiency
  • Installation flexibility
  • High-pressure capabilities, cost-effectiveness.

 

 

 

 

 

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-CMV

 

 

 

 

  • Overview

grundfos-CMV-1The vertical, multistage CMV pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.

The pumps are of the close-coupled type, with a mechanical shaft seal.

The Grndfos CMV pumps are available with cast-iron base and discharge part whereas the remaining wetted parts are made of stainless steel (AISI 304/DIN 1.4301).

Applications

While each Grundfos CMV pump can be customised to meet individual requirements, the pump family is designed to be used in a wide variety of applications.

These include

  • Pressure-boosting systems
  • Domestic water supply systems
  • Cooling systems
  • Air-conditioning systems
  • Horticultural irrigation systems
  • Small industrial applications.

grundfos-cmv-325131_6bFeatures and benefits

  • Compact design
  • Modular design/customised solutions
  • High reliability
  • Low noise level
  • High-performance hydraulics
  • Grundfos motor

 

 

 

 

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Grundfos-NKE-NKGE

 

 

 

Grundfos CurveGrundfos NKE/NKGE

pumps are long-coupled pumps equipped with a motor with built-in frequency converter

Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications demanding reliable and cost-efficient supply. End-suction pumps are used in five main fields of applications: Water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.

NKE/NKGE pumps are long-coupled pumps equipped with a motor with built-in frequency converter and the necessary application software to achieve an all-in-one solution enabling electronic speed control. Electronic speed control enables continuously variable control of motor speed which again enables adaptation of the performance to a given requirement.

The NKE pump lives up to the EN733 standard and the NKGE pumps lives up to the ISO2858 standard. The range for motors with built-in frequency converter goes up to 22 kW.

Although NBE/NBGE pumps are more compact and therefore fit into confined spaces, the NKE/NKGE end-suction pumps with a spacer coupling are easier to service.

Main product characteristics

  • Spacer coupling making service possible without dismantling the motor from the base plate
  • Optimised hydraulics in housing and impeller = unimpeded liquid flow
  • O-ring seal between pump housing and cover = no risk of leakage
  • Housing, impeller and wear ring in different materials = improved corrosion resistance, no sticking elements
  • Closed bal bearings = correct lubrication, no dust instruction
  • Back pull-out design for easy dismantling in case of service
  • Pump is electro coated to increase corrosion resistance
  • Available with eff1 motors
  • Available in a number of shaft seal and material variants
  • PN 10 and 16 bar.
  • Temperature up to 140C
  • Energy saving

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Grundfos Hydro Multi-E - Booster set

Hydro multi-EHydro Multi-E is an innovative pressure booster system specially designed for building service applications.

As standard, Hydro Multi-E booster sets consist of two to four identical CRE pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

The control of the booster set builds on the master and slave principal where one pump is the master pump and where the other pumps act as slaves.
Hydro Multi-E booster sets are supplied as complete, pre-assembled and thoroughly tested booster sets, ready to install. The set point is easily adjusted via the Grundfos R100 remote control or from the control panel. The advanced control takes care of other adjustments to maintain constant pressure and optimum comfort.

Hydro Multi-E is built on Grundfos CRE pumps, known for their extremely high efficiency and reliability. The speed-controlled motors provide unique control functionality, which increases the comfort of the user and decreases operating costs. High quality materials are used throughout.

Benefits:

  • Extreme high reliability and efficiency
  • Perfect adaptation to demand
  • Constant pressure
  • Small foot print
  • Simple to use
  • Turnkey booster set ready for installation – plug ‘n’ pump unit
  • Hygienic designed manifolds

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Pages:« Prev1234Next »