You are here: Distributor Pompa Air».KSB Pumps

.KSB Pumps

KSB-Amajet

 

 

 

Design

amajet-pic-lightboxLs

 

KSB-Amajet Stationary or portable unit with horizontal or vertical submersible motor propulsive jet pump with non-clogging free-flow impeller. Motor rating 5.5 to 27 kW. Available variants: Amajet, SewerAmajet, SwingAmajet, MultiAmajet.

 

Applications

Cleaning of stormwater tanks and storage sewers.

Overview of technical data

Type of bearing Rolling element bearings
Casing partition Radially split
Drive IEC standardized motor
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400 V, 3~
Explosion protection EEX D IIB T4; EEX D IIB T3
No. of impeller entries Single entry
Impeller material (EN standard) 1. 4517;0.9635;JL 1040
Type of installation Close- coupled
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40 °C
Nozzle position Side- top
Pump set location Wet well
Shaft material (EN standard) 1. 4021
Suction characteristics Non- priming
Type of impeller Free flow impeller; Open
Type of connection Flange, loose flange
UNSPSC classification 4015150300
Casing material (EN standard) JL 1040
eClass assignment 36410100; 36410000;36410104
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Water; Industry and process engineering;Waste water / sewage
Casing material Cast iron
Maximum drive rating 16 kW
Type of installation Stationary
Maximum flow rate 195 m³/h
Minimum flow rate 83 m³/h
Maximum speed of rotation 1. 750 1/min

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB-Multi Eco-Pro

 

KSB-Multi Eco-Pro

KSB_Hya_Eco-modularD e s i g n

Pump
▪ Centrifugal pump
▪ Close-coupled design
▪ Multistage
▪ Self-priming
Controlmatic E.2
▪ Starts up and stops the pump in line with consumer
demand
▪ Protects the pump against dry running

D r i v e

▪ Single-phase AC motor
▪ 220 – 240 V / 50 Hz with thermal overload protection
▪ Motor IP 44
▪ Insulation class F

B e a r i n g s

▪ Deep-groove ball bearings
▪ Grease-lubricated for life

Fluids handled

KSB-Hya-eco_curvesPump for handling clean to turbid water not containing
aggressive, abrasive or solid substances.
▪ River, lake and groundwater
Main applications
▪ Irrigation systems
▪ Domestic water supply
▪ Washing plants

Materials

Overview of available materials
Component Material
Pump casing Cast iron coated with anti-corrosive
Discharge cover Cast iron coated with anti-corrosive
Impellers/stage casing Noryl
Jacket Stainless steel
Shaft Chrome steel
Motor housing Aluminium

Product benefits

▪ Reliable, sturdy pump installation thanks to corrosionprotected
pump casing with stainless steel jacket
▪ Ready-to-connect, easy installation and commissioning
▪ Automatic and quick priming once the pump casing has
been filled. Suction lift up to 8 m thanks to self-priming
design (KSB patent).
▪ Energy-efficient, low-noise operation thanks to wearresistant
multistage hydraulic system with good efficiency

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB-Mega

 

KSB-MEGA Horizontal, end suction, modified volute casing

KSB-MEGA_1Application

The GIW Mega Slurry is a high-performance, lowmaintenance slurry pump recommended for coarse
or fine particles from solids laden waste water to
aggressive slurries of an abrasive and/or corrosive
nature.Consult factory for corrosive applications.

Design

Horizontal, end suction, modified volute casing
pump includes three vane, open design impeller
for large solids passage and good wear
characteristics over a broad operating range. The
single stage, compact arrangement allows easy
maintenance of wet end components. The back
pull-out design permits removal of the mechanical
end without disturbing the wet end or piping.

KSB_mega Casing

The pump casing is horizontal volute casing, one piece casting with integral mounting foot.

 Shaft

The shaft is dry design, protected by an easily renewable shaft sleeve in the gland sealing area. The impeller threads on the
pump end of the shaft and a keyway is provided on the drive end to attach the coupling or pulley.

 Shaft Sealing

The entry of the shaft into the pump is sealed by standard gland packing or by an optional mechanical seal.

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB-AMA DRAINER

 

 

KSB-Ama drainerDesign

KSB-Amadrainer Fully floodable, vertical, close-coupled single-stage submersible motor pumps, IP 68, with or without level control, for a maximum immersion depth of 10 m.

Applications

Automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of underground passages, water extraction from rivers and reservoirs.

ama_drainern_performance_curveOverview of technical data

Type of bearing Ball bearings
Drive Electric motor
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230 V, 1~
Explosion protection OHNE
No. of impeller entries Single entry
Impeller material (EN standard) NORYL, POLYAMID
Type of coupling 00
Type of lubrication Grease lubrication
Max. permissible fluid temperature 50 °C
Suction characteristics Non- priming
Type of impeller Open; Free flow impeller
Type of connection Thread
Casing material (EN standard) KUNSTSTOFF
Maximum head 12, 00 m
Installation position Vertical
Shaft seal type 00; Shaft seal ring
Main applications Water; Waste water / sewage;Building services
Casing material Plastics
Maximum drive rating 1, 05 kW
Type of installation Transportable; Stationary
Maximum flow rate 16, 50 m³/h
Maximum speed of rotation 2. 800 1/min

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB-BOA-CVE H control valves

 

 

 

BOA-CVE H control valves – for optimised and straightforward control of liquid flows

The BOA-CVE H globe valve provides reliable control of liquid flows in all industrial applications. It also offers the major benefit of being quick and easy to employ, for example in air-conditioning systems and heating systems.

KSB-BOA-CVE_HThe control valve can be dismantled easily without any special tools. By changing the internal valve components, operators can adapt it to a variety of control duties.

From air-conditioning to heating systems: Control valves are used in a variety of applications

  • General industrial facilities
  • Heating systems
  • Air-conditioning systems

Benefits of the BOA-CVE H control valve

  • Great variety of valve seat and plug diameters covers the entire range of nominal diameters.
  • Both sides of the seat can be used. If the seat is damaged, it can simply be turned over.
  • The soft-seated plug design meets stringent customer requirements on tight shut-off.
  • To reduce noise emissions, a parabolic plug and multi-hole cage are standard features of the globe valve.
  • On the standard variant, the stem is sealed by maintenance-free PTFE V-rings supported by a spring. Graphite packings are used for temperatures exceeding 250 °C.
  • The pressure relief design for valves > DN65, which is available on request, allows smaller actuators to be used.

Actuation of KSB’s BOA-CVE/CVP H control

  • KSB-BOA-CVE_HpdfThe range of actuators includes electric and pneumatic actuators with actuating forces of up to 14,000 Newton.
  • The widely used electric actuators offer input and output signals from 0/2 to 10 V or 4 to 20 mA. A three-point (open/stop/closed) actuator with limit switches can be supplied for basic control duties.
  • Actuators are available in 24V and 230V versions and four sizes.
  • Pneumatic diaphragm actuators are available in two sizes and with a comprehensive range of accessories (e.g. positioner, solenoid valves, etc.).

The new BOA-CVE H control valve from KSB is made of nodular cast iron (JS1025). Nominal sizes range from DN 20 to 150; nominal pressure classes are PN 16 and 25.

Variants Control valve:

▪ Seat with PTFE gasket up to 250 °C, leakage class VI
▪ Anti-cavitation design
▪ Very low kvs
values from 0.1 to 2.1 m³/h
▪ Balanced plug from DN 65 (up to 200 °C)
▪ Other flange designs
▪ High-temperature resistant paint (grey aluminium)
▪ Certification to customer specification
Actuators:
▪ Actuator configured to match the order specification
▪ Integrated process controller
▪ Power back-up unit
▪ Heating of the motor space

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB - Etanorm

 

 

 

 

Etanorm modularDesign
The KSB Etanorm is Horizontal, long-coupled, single-stage volute casing pump with ratings and main dimensions to EN 733 in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Design to ATEX.
Applications
Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.

 

Overview of technical data
Type of bearing Ball bearings
Casing partition Radially split
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection IP 55
No. of impeller entries Single entry
Impeller material (EN standard) 1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A 48 CL 35B;LTB2
Type of installation Long- coupled
Type of coupling Direct
Type of lubrication Grease / Oil lubrication
Max. permissible fluid temperature 140 °C
Nozzle position End suction
Maximum rated pressure (discharge) 16 BAR
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) C45; 1.4462
Standard EN; EN / ANSI
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Radial; Multi-vane impeller;Closed;Closed / Radial
Type of connection Flange
UNSPSC classification 4015150300
Casing material (EN standard) 1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A 48 CL 35B;JS1030 / A536 GR 60-40-18
eClass assignment 00000000; 36410000;36410101;36410100
Maximum head 160, 00 m
Minimum head 3, 00 m
Installation position Horizontal
Shaft seal type Mechanical seal; Gland packing
Main applications Oil / Gas;Waste water / sewage;Water;Building services;Energy;Industry and process engineering
Casing material Cast iron; Chrome nickel steel;Cast stainless steel;Nodular cast iron;Bronze
Maximum discharge-side pressure 16 bar
Type of installation Stationary
Maximum flow rate 660 m³/h
Minimum flow rate 1, 50 m³/h
Maximum speed of rotation 4. 400 1/min

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB - MoviBOOST-boosting system

 

 

Moviboost_2-lightboxLsDriving the highest quality standards KSB now brings the new range of moviBoost; an advanced, smart, automatic pressure boosting unit with 2 to 6 high pressure pumps developed with state-of-the-art technology and the best materials to meet our customers’ growing demands.

Applicable for a wide range of appliactiosn in industry and construction, the new moviBoost series is more energy effeicient, robust and-user friendly with KSB German controller.

 

 

 

Pressure boosting in:

  • Resedential buildings
  • Hospitals
  • Offices
  • Hotels, departmental stores, industry etc.

Water supply systems for:

  • Buildings
  • Pressurized irrigation systems
  • Service water supply system in trade and industry
  • Sprinkler systems

Fire-fighting systems for:

  • Industrial plants
  • Resedential buildings
  • Departmental stores

Everything under perfect control with smart collection of components!

  1. Movitec Pumps
  2. Variable Speed Control System
  3. KSB Butterfly valves for each pump in the system
  4. Danfoss check valve for each pump
  5. RoHS Compliant KSB German Controller
  6. HMI – pump monitoring

With its world-class operating reliability and value-added features,moviBoost offers our customers the exact solution they require.

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB-Amacan-S

 

 

 

KSB-Amacan S

KSB-Amacan-S

Design
Wet-installed submersible motor pump with mixed flow impeller, singlestage, for installation in discharge tubes, explosion protection to ATEX II G2 T3.
Applications
Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.

 

Overview of technical data
Type of bearing Rolling element bearings
Casing partition Radially split
Diffuser material (EN standard) 1. 4057;1.4021
Drive Electric motor
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400/ 690 V; 3~
No. of impeller entries Single entry
Impeller material (EN standard) CC480K- GS;CC333G-GS
Type of installation In- line
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40 °C
Nozzle position In- line
Pump set location Wet well
Shaft material (EN standard) 1. 4021;1.4057
Suction characteristics Non- priming
Suitable for drinking water Yes
Type of impeller Mixed flow impeller
Casing material (EN standard) JL 1040
eClass assignment 36410000; 36410106;36410100
Free passage 160 mm
Maximum head 55, 00 m
Minimum head 2, 50 m
Installation position Vertical
Shaft seal type Mechanical seal
Main applications 00; Water;Energy;Mining / Dredges
Casing material Cast iron
Maximum drive rating 1. 100 kW
Type of installation Stationary
Maximum flow rate 21. 600 m³/h
Minimum flow rate 500 m³/h
Maximum speed of rotation 1. 800 1/min

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Ksb-Etaline-R

 

 

 

 

KSB-Etaline-RKsb-Etaline-R

Design
Vertical close-coupled, in-line circulator pump with volute casing and standardized motor.
Applications 
Hot water heating systems, cooling circuits, air-conditioning, water and service water supply systems, industrial recirculation systems.

 

 

Overview of technical data
Type of bearing Ball bearings
Casing partition Radially split
Drive IEC standardized motor, electric motor
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400 V, 3~
Impeller material (EN standard) 1. 4408;CC480K-GS;JL1040
Type of installation Close- coupled
Type of coupling Direct
Type of lubrication Oil lubrication
Max. permissible fluid temperature 140 °C
Nozzle position In- line
Maximum rated pressure (discharge) PN25
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1. 4057;C45
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Flange
Casing material (EN standard) JL1040; JS 1025
eClass assignment 36410000; 36410100;36410101;36410105
Maximum head 97, 00 m
Installation position Horizontal or vertical
Shaft seal type 00
Main applications Industry and process engineering; Water;Building services
Casing material Carbon steel
Type of installation Stationary
Maximum flow rate 1. 900 m³/h
Minimum flow rate 60 m³/h
Maximum speed of rotation 1. 750 1/min

 

 
EBARA               GRUNDFOS              KSB              WILO          TSURUMI

KSB-Hya-Eco VP

 

 

KSB-Hya-EcoDesign

KSB-Hya Eco VP Fully automatic package pressure booster system, with 2 to 3 vertical high-pressure pumps and continuously variable speed adjustment of each pump for fully electronic control of the required supply pressure, with two standard volt-free changeover contacts for fault indication. Configuration and functions to DIN 1988, Part 5. Automated with BoosterControl and PumpDrive.

Applications
Building service, Residential buildings, hospitals, office buildings, hotels, department stores, industry, and other applications.

 

Overview of technical data
Type of coupling Direct
Pump set location Dry installed
Casing material (EN standard) 1. 4301
Maximum head 100, 00 m
Maximum inlet pressure 6 bar
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Water;Building services
Maximum drive rating 7, 50 kW
Type of installation Stationary
Maximum flow rate 70 m³/h
Maximum speed of rotation 2. 850 1/min
Standby pump Yes
Type of connection Direct
Operating mode Cascade and variable

 

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Pages:« Prev1234Next »