.KSB Pumps

KSB - RDLO®

KSB-RDLOr1

 

Design

KSB-RDLO®
Single-stage, axially split volute casing pump for horizontal or vertical installation with double-entry radial impeller, mating flanges to DIN, ISO, BS or ANSI.

Applications

Handling of raw, pure and service water as well as seawater in water treatment plants, irrigation and drainage pumping stations, in power stations, fire-fighting systems, shipbuilding and the petrochemical industry.

 

Overview of technical data

Type of bearing Rolling element and plain bearings
Casing partition Axially split
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage, high voltage
No. of impeller entries Double entry
Impeller material (EN standard) BRONZE; CHROMSTAHL;DUPLEX;SUPER DUPLEX
Type of installation Long- coupled
Type of coupling Direct; Gear
Type of lubrication grease- / oil- and product lubrication
Max. permissible fluid temperature 80 °C
Nozzle position In- line
Pump set location Dry installed
Shaft material (EN standard) 13 % CHROMSTAHL;DUPLEX
Suction characteristics Non- priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Flange
Casing material (EN standard) DUPLEX; GRAUGUSS;SPHAEROGUSS;SUPER DUPLEX
eClass assignment 36410101; 36410000;36410100
Maximum head 240, 00 m
Minimum head 15, 00 m
Installation position Horizontal or vertical
Shaft seal type Gland packing; Mechanical seal
Main applications Industry and process engineering; Water;Energy;Building services;Mining / Dredges
Casing material Cast iron; Cast duplex steel;Nodular cast iron
Maximum discharge-side pressure 25 bar
Maximum drive rating 5. 000 kW
Type of installation Stationary
Maximum flow rate 10. 000 m³/h
Minimum flow rate 1. 200 m³/h

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

KSB - Etanorm - SYT

 

KSB_Etanorm_SYT

DesignKSB-Etanorm SYT Horizontal, long-coupled volute casing pump in back pull-out design with ratings and main dimensions to EN 733, single-stage, with replaceable casing wear rings. Design to ATEX.

Application

Heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation (DIN 4752).

Etanorm SYT thermal oil pumps

Overview of technical data
KSB-Etanorm SYT
Type of bearing Rolling element and plain bearings
Casing partition Radially split
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor, turbine
Drive voltage Low voltage
No. of impeller entries Single entry
Impeller material (EN standard) GJL- 250;JL 1040
Type of installation Long- coupled
Type of coupling Direct
Type of lubrication Grease / Oil lubrication
Max. permissible fluid temperature 350 °C
Nozzle position End suction
Maximum rated pressure (discharge) PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1. 4021.05 HRC 55
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Radial
Type of connection Flange
Casing material (EN standard) GJS- 400-15;GJS-400-18-LT;JS 1025;JS 1030
eClass assignment 36410000; 36410100;36410101
Maximum head 102, 00 m
Minimum head 3, 00 m
Installation position Horizontal
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Building services;Oil / Gas
Casing material Nodular cast iron
Maximum discharge-side pressure 16 bar
Type of installation Stationary
Maximum flow rate 740 m³/h
Minimum flow rate 1 m³/h
Maximum speed of rotation 3. 500 1/min

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

KSB CHTR

Design
Horizontal, high-pressure barrel-type pump with radial impellers, single-entry and double-entry, multistage, with flanges/weld end nozzles to API 610.
Applications
Main applications: refineries, petrochemical industry, seawater injection on offshore platforms and steam generation in power stations and industrial plants.
Overview of technical data
Barrel casing Yes
Type of bearing Rolling element and plain bearings
Casing partition Radially split
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor, turbine
No. of impeller entries Single / Double entry
Other impeller types Closed / Radial
Type of installation Long- coupled
Type of coupling Direct; Gear;Variable speed coupling;Geared variable speed coupling
Type of lubrication ( forced) oil lubrication
Max. permissible fluid temperature 400 °C
Nozzle position Variable
Pull-out design Yes
Pump set location Dry installed
Suction characteristics Non- priming
Type of connection Flange, weld ends
Type of discharge casing Annular casing
Type of stage casing Stage casing with diffuser
Type of suction casing Annular casing
Maximum head 4. 000,00 m
Installation position Horizontal
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Energy;Oil / Gas
Casing material Duplex steel; Carbon steel;Chrome steel
Maximum discharge-side pressure 400 bar
Maximum suction pressure 30 bar
Type of installation Stationary
Maximum flow rate 1. 450 m³/h
Maximum speed of rotation 7. 000 1/min
EBARA               GRUNDFOS              KSB              WILO

Multitec by KSB – versatile high-pressure pump with low NPSH values

 

 

 

 

 

 

 

 

KSB Multitec is one of the most versatile pumps in KSB’s extensive range. A large choice of available materials and designs ensures an ideal match for the fluid to be handled and the system the pump will be installed in.

KSB’s Multitec pumpThe Multitec high-pressure pump in ring-section design is also available with a PumpDrive variable speed system.

KSB Multitec high-pressure pumps are suited to the following applications:

  • Water supply
  • Drinking water supply (ACS)
  • Industry (ATEX)
  • Irrigation
  • Power stations
  • Heating, filtering, fire-fighting, reverse osmosis, snow guns, washing plants

Benefits of the Multitec high-pressure pump:

Flexible
Ideal adjustment of suction and discharge nozzles to the system

Low NPSH value
Special suction impeller

Reliable
Wear-resistant, self-aligning plain bearing made of silicon carbide; excellent suction performance

High availability
Balancing of axial thrust for a long service life

Easy to service
Easy dismantling of bearing assembly and mechanical seal

Low operating costs
Only one shaft seal on most installation types; hydraulic system with optimum efficiency

Versatile
Large choice of materials and designs; seven installation types

EBARA               GRUNDFOS              KSB              WILO


Warning: Illegal string offset 'layout' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1264

Warning: Illegal string offset 'image_url' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1583

Warning: Illegal string offset 'images_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1585

Warning: Illegal string offset 'image_desc' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1586

Warning: Illegal string offset 'video_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1587

Warning: Illegal string offset 'video' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1588

Warning: Illegal string offset 'wordtube_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1589

Warning: Illegal string offset 'wordtube_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1590

Warning: Illegal string offset 'wordtube_height' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1591

KSB DDPi

 

Design
The KSB DDPi switchgear is a low-voltage switchgear combination to EN 60439 with integrated microprocessor for controlling and protecting one or two pumps. D.o.l. starting of motors.
Applications
Sewage / waste water lifting units / pumping stations for duties such as drainage, dewatering, water extraction, water transfer and waste water disposal.

 

    EBARA               GRUNDFOS              KSB              WILO

    Design
    The KSB DDPi switchgear is a low-voltage switchgear combination to EN 60439 with integrated microprocessor for controlling and protecting one or two pumps. D.o.l. starting of motors.
    Applications
    Sewage / waste water lifting units / pumping stations for duties such as drainage, dewatering, water extraction, water transfer and waste water disposal.
    Overview of technical data
    Level indication Pressure switch
    Open- / Closed-loop control Open- loop control
    Max. number of pumps 2
    Starting method Direct
    Voltage 3~ 400 V / 50 HZ
    Overview of technical data
    Level indication Pressure switch
    Open- / Closed-loop control Open- loop control
    Max. number of pumps 2
    Starting method Direct
    Voltage 3~ 400 V / 50 HZ

    Warning: Illegal string offset 'layout' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1264

    Warning: Illegal string offset 'image_url' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1583

    Warning: Illegal string offset 'images_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1585

    Warning: Illegal string offset 'image_desc' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1586

    Warning: Illegal string offset 'video_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1587

    Warning: Illegal string offset 'video' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1588

    Warning: Illegal string offset 'wordtube_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1589

    Warning: Illegal string offset 'wordtube_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1590

    Warning: Illegal string offset 'wordtube_height' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1591

    KSB Etachrom BC PumpDrive

    EBARA               GRUNDFOS              KSB              WILO

    Design
    Close-coupled, horizontal, single-stage annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings and motor-mounted variable speed system.
    Applications KSB Etachrom BC PumpDrive
    Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, fire-fighting systems, swimming pools, handling of condensate, hot water, cooling water, fire-fighting water, oil, drinking water, cleaning agents, service water.
    Overview of technical data
    Casing partition Radially split
    Drive IEC standardized motor
    Drive frequency 50 Hz / 60 Hz
    Type of drive Electric motor
    Drive voltage Low voltage
    Connection to power supply 220/ 400/690 V, 3~
    No. of impeller entries Single entry
    Impeller material (EN standard) 1. 4571
    Type of installation Close- coupled
    Type of coupling Direct
    Max. permissible fluid temperature 110 °C
    Guaranteed to be silicon-free Yes
    Nozzle position End suction
    Maximum rated pressure (discharge) PN 12
    Pull-out design Yes
    Pump set location Dry installed
    Shaft material (EN standard) 1. 4571
    Standard DIN
    Suction characteristics Non- priming
    Suitable for drinking water Yes
    Type of casing Annular casing
    Type of impeller Closed; Radial;Multi-vane impeller;Closed / Radial
    Type of connection Flange
    Casing material (EN standard) 1. 4571
    eClass assignment 36410000; 36410100;36410101
    Maximum head 108, 00 m
    Minimum head 2, 00 m
    Installation position Horizontal
    Shaft seal type Mechanical seal
    Main applications Industry and process engineering; Water;Energy;Building services
    Casing material Chrome nickel molybdenum steel
    Maximum discharge-side pressure 12 bar
    Maximum drive rating 45 kW
    Type of installation Stationary
    Maximum flow rate 250 m³/h
    Minimum flow rate 2 m³/h
    Maximum speed of rotation 2. 900 1/min

    Warning: Illegal string offset 'layout' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1264

    Warning: Illegal string offset 'image_url' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1583

    Warning: Illegal string offset 'images_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1585

    Warning: Illegal string offset 'image_desc' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1586

    Warning: Illegal string offset 'video_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1587

    Warning: Illegal string offset 'video' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1588

    Warning: Illegal string offset 'wordtube_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1589

    Warning: Illegal string offset 'wordtube_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1590

    Warning: Illegal string offset 'wordtube_height' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1591

    KSB Compacta F

    Design

    Floodable single-pump or dual-pump sewage lifting unit for automatic disposal of sewage and faeces below the flood level. Automated with LevelControl  – KSB Compacta F .

    Applications
    Basement flats, bars, basement party rooms and saunas, cinemas and theatres, department stores and hospitals, hotels, restaurants, schools, public buildings, industrial plants, joint sewage disposal for rows of houses, etc.

    Overview of technical data

    Type of bearing Ball bearings
    Drive frequency 50 Hz
    Type of drive Electric motor
    Drive voltage Low voltage
    Impeller material (EN standard) PP; CHROM-NICKEL-STAHL
    Type of coupling Direct
    Type of lubrication Grease lubrication
    Max. permissible fluid temperature 40 °C
    Number of pumps 2
    Pump set location Dry installed, floodable
    Suction characteristics Non- priming
    Type of connection Flange
    UNSPSC classification 4015150300
    Casing material (EN standard) PP; PE;JL 104
    eClass assignment 36410100; 36410107;00000000;36410000
    Maximum head 24, 50 m
    Installation position Horizontal
    Shaft seal type Mechanical seal
    Main applications Water; Waste water / sewage;Building services
    Casing material Plastics
    Maximum drive rating 11, 80 kW
    Type of installation Stationary
    Maximum flow rate 140 m³/h
    Maximum speed of rotation 2. 800 1/min
    EBARA               GRUNDFOS              KSB              WILO

    Warning: Illegal string offset 'layout' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1264

    Warning: Illegal string offset 'image_url' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1583

    Warning: Illegal string offset 'images_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1585

    Warning: Illegal string offset 'image_desc' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1586

    Warning: Illegal string offset 'video_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1587

    Warning: Illegal string offset 'video' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1588

    Warning: Illegal string offset 'wordtube_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1589

    Warning: Illegal string offset 'wordtube_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1590

    Warning: Illegal string offset 'wordtube_height' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1591

    Amarex N CK-Pumpstation

    Design
    Ready-to-connect package single-pump or dual-pump station with PE-LLD (polyethylene) collecting tank for underground installation. Equipped with either one or two (explosion-proof or non-explosionproof) Amarex N submersible motor pumps with free-flow impeller. Collecting tank design to DIN 1986-100 and EN 752 / EN 476 / EN 1671. Automated with LevelControl.
    Applications
    Redevelopment of premises, sewage disposal in various sectors, joint sewage disposal for several residential units.

    Commecial Building Services

    • Hydro MPC :

    • The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the CU 351 controller, they handle even the most difficult boosting jobs with ease and accuracy.
      All components have been combined with focus on quality and efficiency. The Grundfos Hydro MPC booster systems are designed to last: sturdy, compact units with easy access to all service parts. Grundfos Hydro MPC booster systems can be used wherever additional pressure is required. Each booster model has been designed to meet specific customer demands for capacity and control.

     

    The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.

    Grundfos NK/NKG pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), irrigation and process industries.
    Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.

    • Grundfos SEV and SE1 :

    The Grundfos SEV and SE1 pumps are designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

    These two technologically very advanced series of pumps are available with efficient single-channel or SuperVortex impellers allowing for free passage of solids up to 100 mm in size. This greatly reduces the risk of clogging, and ensures maximum up-time and low operating costs.

    • CMV :

    The vertical, multistage CMV pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.

    • CUE :

    The CUE series are frequency converters for the speed control of a wide range of Grundfos pumps. The Grundfos CUE is the latest addition to our E-solution range of speed-controlled pump systems designed for a series of applications such as industry, building services, municipal or private water supply, wastewater and irrigation.

    • Grundfos CM and CME:

    The horizontal multistage pump CM (=Centrifugal Modular) has been created with compactness and modularity as two of its central features, making numerous configurations possible. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter what the application.   The Grundfos CM and CME pumps are non-self-priming, horizontal, multistage, end-suction centrifugal pumps.

    • GRUNDFOS MAGNA/UPE :

    The MAGNA/UPE pumps make up a broad range of small, medium and large circulator pumps fitted with communication equipment and motors with electronic speed control based on permanent magnet (PM) and compact stator motor technology.

    The MAGNA is an innovative member of the Grundfos family of high-quality circulator pumps. With a MAGNA, you can stop worrying about complicated pump settings. Simply install the pump and leave it on the factory setting, AUTOADAPT (MAGNA only).

    • TP, TPE :

    Grundfos TP and TPE vertical in-line pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.

    • DWK , DPK :

    DWK and DPK are submersible pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.

    For  more products and information , please contact us :

    PT.SUKMA Megah – Distributor of Industrial & Domestic Pumps
    Komplek Ruko Bumi Fajar Indah Blok D1/39
    Jalan Fajar Niaga , Bekasi 17145                                                                                                       Phone  : +6221-88851131 , 8863471                                                                                                Fax      : +6221-88851210                                                                                                        Email   : marketing@distributorpompaair.com

    EBARA               GRUNDFOS              KSB              WILO

    Overview of technical data
    Type of bearing Ball bearings
    Cutter Yes
    Drive frequency 50 Hz
    Type of drive Electric motor
    Drive voltage Low voltage
    Impeller material (EN standard) JL1040
    Type of coupling None
    Type of lubrication Grease lubrication
    Max. permissible fluid temperature 55 °C
    Number of pumps 2
    Shaft material (EN standard) 1. 4021
    Suction characteristics Non- priming
    Type of casing Volute casing
    Type of impeller 00; Free flow impeller;Cutter
    Type of connection clamp coupling
    UNSPSC classification 4015150300
    Casing material (EN standard) PA; PE;POLYAETHYLEN
    eClass assignment 36410000; 36410100;36410107
    Free passage 60 mm
    Maximum head 39, 00 m
    Installation position Vertical
    Shaft seal type Mechanical seal
    Main applications Building services; Water;Waste water / sewage
    Casing material Plastics
    Maximum drive rating 4, 20 kW
    Type of installation Stationary
    Maximum flow rate 50 m³/h
    Maximum speed of rotation 2. 900 1/min

    Warning: Illegal string offset 'layout' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1264

    Warning: Illegal string offset 'image_url' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1583

    Warning: Illegal string offset 'images_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1585

    Warning: Illegal string offset 'image_desc' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1586

    Warning: Illegal string offset 'video_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1587

    Warning: Illegal string offset 'video' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1588

    Warning: Illegal string offset 'wordtube_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1589

    Warning: Illegal string offset 'wordtube_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1590

    Warning: Illegal string offset 'wordtube_height' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1591

    KSB - Etanorm-R

    • Design

    Horizontal, long-coupled, single-stage volute casing pump (pump size 125-500 with two stages) in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Design to ATEX.

    • Applications

    Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.

    •      Overview of technical data

    Type of bearing     Ball bearings
    Casing partition     Radially split
    Drive frequency     50 Hz / 60 Hz
    Type of drive     Electric motor, turbine
    Drive voltage     Low voltage
    No. of impeller entries     Single entry
    Impeller material (EN standard)     JL 1040; 1.4408;GJL-250;G-CUSN10
    Type of installation     Long- coupled
    Type of coupling     Direct
    Type of lubrication     Grease / Oil lubrication
    Max. permissible fluid temperature     140 °C
    Nozzle position     End suction
    Maximum rated pressure (discharge)     PN 16
    Pull-out design     Yes
    Pump set location     Dry installed
    Shaft material (EN standard)     C45; 1.4057
    Suction characteristics     Non- priming
    Type of casing     Volute casing
    Type of impeller     Radial; Multi-vane impeller;Closed;Closed / Radial
    Type of connection     Flange
    Casing material (EN standard)     JL 1040; JS 1025
    eClass assignment     36410000; 36410100;36410101
    Maximum head     90, 00 m
    Minimum head     2, 50 m
    Installation position     Horizontal
    Shaft seal type     Gland packing; Mechanical seal
    Main applications     Water; Building services;Energy;Waste water / sewage;Industry and process engineering
    Casing material     Nodular cast iron; Cast iron
    Maximum discharge-side pressure     16 bar
    Type of installation     Stationary
    Maximum flow rate     2. 280 m³/h
    Minimum flow rate     50 m³/h
    Maximum speed of rotation     1. 750 1/min

     

    EBARA               GRUNDFOS              KSB              WILO

    Pages:« Prev1234