You are here: Distributor Pompa Air»Water Supply

Water Supply

Water Supply

KSB - Movitec B-Multistage vertical high-pressure centrifugal pump

 

Design

Ksb-movitec-BKSB-Movitec-B Multistage, vertical, high-pressure centrifugal pump in ring-section design with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design), close-coupled. ATEX-compliant version available.

 

Applications

Spray irrigation, irrigation, washing, water treatment, fire-fighting and pressure booster systems, hot water and cooling water recirculation, boiler feed systems etc.
Sizes
2, 4, 6, 10, 15, 25, 90

 

 

 

Overview of technical data

Barrel casing Yes
Type of bearing Plain bearings
Casing partition Radially split
Diffuser material (EN standard) 1. 4301;1.4404
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
No. of impeller entries Single entry
Impeller material (EN standard) 1. 4301;1.4404
Type of installation In- line
Type of coupling Direct
Type of lubrication Oil / Product lubrication
Max. permissible fluid temperature 140 °C
Nozzle position In- line
Maximum rated pressure (discharge) 40 BAR
Pump set location Dry installed
Shaft material (EN standard) 1. 4305;1.4401
Suction characteristics Non- priming
Suitable for drinking water Yes
Type of impeller Radial
Type of connection Flange
Type of stage casing Stage casing with diffuser
UNSPSC classification 4015150300
Casing material (EN standard) 1. 4301;1.4401;JL 1040
eClass assignment 36410101
Maximum head 249, 00 m
Installation position Vertical
Shaft seal type Mechanical seal
KSB_Movitec-B-Curves

 

 

 

 

 

 

 

 

 

 

 

Main applications

 

 

 

 

 

 

 

 

 

 

 

Industry and process engineering; Water;Building services

Casing material Chrome nickel steel
Maximum discharge-side pressure 40 bar
Maximum drive rating 45 kW
Type of installation Stationary
Maximum flow rate 112, 80 m³/h
Maximum speed of rotation 2. 900 1/min

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Ebara-MSS/MSSH Ring Section Pumps

 

MSS/MSSH Ring Section Pumps

EBARA_MSS_MSSHMSS/MSSH series pumps are horizontal ,single casing, ring section, multistage structure. With simplified construction, MSS/MSSH can be highly efficient and reliable.

Applications

Boiler feed Processing water supply City high pressure water supply

Ratings

Flow (Q): to 324 m3/h
Maximum allowable operation pressure : to 10MPa.G
Maximum allowable suction pressure: 2.45MPa.G
Temperature range: to 165℃
Applicable transportation medium specific gravity :0.8 and above.

Ebara-MSS_Curves

 

Features

Radially Split Casing
Between Bearing
Wide high efficiency region:
High efficiency and reliability :
Simple structure ,easy maintenance :
Compact ,low -cost : optimized design ,
Short manufacturing term : standardized production

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Wilo-MultiPress FMP

 

Wilo-MultiPress FMP

Wilo_MultiPress_FMPDesign

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Ideal as water supply system in buildings
  • Low-noise due to multistage design
  • Electronic pump control
  • All parts that come in contact with the fluid are corrosion-free

Technical data

  • Wilo-MultiPrees_CurvesMains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class IP 54
  • Pressure-side connection R 1
  • Suction-side connections Rp 1 for FMP3..; Rp 1¼ for FMP6..

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Wilo-Multivert MVI 32/52/70/95

 

 

 

Wilo-Multivert MVI 32/52/70/95

Wilo-MVI-modulDesign

Non-self-priming multistage pump

Application

  • Water supply and pressure boosting
  • Fire extinguishing systems
  • Boiler feed
  • Industrial circulation systems
  • Process engineering
  • Cooling water circulation systems
  • Washing and sprinkling systems

Special features / product benefits

  • All parts that come in contact with the fluid are corrosion-resistant
  • Materials: Stainless steel 1.4301 (MVI 32/52 also 1.4404), pump housing EN-GJL-250 cataphoretic-coated (MVI 32/52 also 1.4408)
  • EPDM seals.
  • All relevant components are KTW- and WRAS-certified
  • IE2 IEC standard motor, 3-phase, 2-pole

Technical data

  • Wilo-Multivert-MVI)Mains connection 3~230 V  (±10 %), 50 Hz (Δ) or optionally 220 V  (±10 %), 60 Hz (Δ) up to 4.0 kW, 400 V  (±10 %), 50 Hz (Y) or optionally 380 V  (±10 %), 60 Hz (Y) or 460 V  (±10 %), 60 Hz (Y) from 4.0 kW
  • Fluid temperature ‐15 to +120 °C
  • Max. operating pressure 16/25 bar
  • Max. inlet pressure 10 bar
  • Protection class IP 55
  • Flange connection PN 16/PN 25: Round flange (MVI 32, = DN65; MVI 52 = DN80; MVI 70/95 = DN100)

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

 

KSB-BOA-CVE H control valves

 

 

 

BOA-CVE H control valves – for optimised and straightforward control of liquid flows

The BOA-CVE H globe valve provides reliable control of liquid flows in all industrial applications. It also offers the major benefit of being quick and easy to employ, for example in air-conditioning systems and heating systems.

KSB-BOA-CVE_HThe control valve can be dismantled easily without any special tools. By changing the internal valve components, operators can adapt it to a variety of control duties.

From air-conditioning to heating systems: Control valves are used in a variety of applications

  • General industrial facilities
  • Heating systems
  • Air-conditioning systems

Benefits of the BOA-CVE H control valve

  • Great variety of valve seat and plug diameters covers the entire range of nominal diameters.
  • Both sides of the seat can be used. If the seat is damaged, it can simply be turned over.
  • The soft-seated plug design meets stringent customer requirements on tight shut-off.
  • To reduce noise emissions, a parabolic plug and multi-hole cage are standard features of the globe valve.
  • On the standard variant, the stem is sealed by maintenance-free PTFE V-rings supported by a spring. Graphite packings are used for temperatures exceeding 250 °C.
  • The pressure relief design for valves > DN65, which is available on request, allows smaller actuators to be used.

Actuation of KSB’s BOA-CVE/CVP H control

  • KSB-BOA-CVE_HpdfThe range of actuators includes electric and pneumatic actuators with actuating forces of up to 14,000 Newton.
  • The widely used electric actuators offer input and output signals from 0/2 to 10 V or 4 to 20 mA. A three-point (open/stop/closed) actuator with limit switches can be supplied for basic control duties.
  • Actuators are available in 24V and 230V versions and four sizes.
  • Pneumatic diaphragm actuators are available in two sizes and with a comprehensive range of accessories (e.g. positioner, solenoid valves, etc.).

The new BOA-CVE H control valve from KSB is made of nodular cast iron (JS1025). Nominal sizes range from DN 20 to 150; nominal pressure classes are PN 16 and 25.

Variants Control valve:

▪ Seat with PTFE gasket up to 250 °C, leakage class VI
▪ Anti-cavitation design
▪ Very low kvs
values from 0.1 to 2.1 m³/h
▪ Balanced plug from DN 65 (up to 200 °C)
▪ Other flange designs
▪ High-temperature resistant paint (grey aluminium)
▪ Certification to customer specification
Actuators:
▪ Actuator configured to match the order specification
▪ Integrated process controller
▪ Power back-up unit
▪ Heating of the motor space

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-TP Vertical in line pump

 

 

Grundfos-TP Vertical in line pump

Grundfos-TPm

 

Grundfos vertical in-line volute pumps are used in a number of applications including air conditioning and heating. The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals.

The pumps are close-coupled, meaning that the pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid compared to similar canned rotor pumps.

Max flow: 4,500 m3/h
Max motor size: 630 kW

 

 

 

Main product characteristics

  • Optimised hydraulics for high efficiency
  • Low noise level
  • High efficiency motors (EFF1) as standard
  • Top-pull-out design for easy dismantling during service
  • Mechanically and hydraulically balanced impeller to increase motor bearing and shaft seal lifetime
  • The entire pump is electro-coated to increase corrosion resistance
  • Available in single and twin pump design
  • Available in a number of shaft seal and material variants
  • PN 6,10, 16 and 25 bar.
  • Temperature up to 150C

1348746847452

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Ebara-ELINE/ELINE-D Vertical In-line Pumps

 

 

Ebara-ELINE/ELINE-D Vertical In-line Pumps

wpp1332904252APPLICATION
Pressure heating systems
Cold water circuits
Coling circuit/towers
Water supply (non-drinking)
Presuure increase
Distribution of domestic hot water supply
Mainly used in industry for pumping clear liquids, free of abrasive particles in suspension and chemically neutral.

TECHNICAL DATA
Threephase IP 55, with flange
Rotation speed: 1.450-2.900 rpm
Frequency : 50Hz (60 Hz upon request)
Insulation : Class F
Ambient temperature : 40°C Max

 

 

MATERIALS

Designation                Standard Material                            Optional
Casing                           Cast Iron (GG-25)
Spacer                          Cast Iron (GG-25)
Impeller                      Cast Iron (GG-20)
Shaft                             Stainless steel(1.4401)                     Bronze
Oring                            KLINGERIT
Mechanical seal        Carbon/Ceramic

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Wilo-MultiCargo FMC

 

 

 

wilo_multicargoDesign
The Wilo Multi Cargo FMC Self-priming water-supply unit

Application
Water supply
Sprinkling
Irrigation and spraying
Rainwater utilisation

Type key
Example: FMC-305-EM
F System consisting of pump with integrated Fluidcontrol
MC MultiCargo (multistage, non-self-priming, horizontal centrifugal pump)
3 Nominal flow rate Q in m³/h
05 Number of impellers
EM Single-phase current, 1~230 V, 50 Hz

Special features/product advantages
Ideal system for supplying water throughout the building
Low-noise through multistage construction
Outstanding self-priming capability, due to innovative suction apparatus
Electronic pump control
All parts in contact with the fluid are corrosion-free

Wilo-MultiCargo FMC_grafikTechnical data
Mains connection 1~230 V, 50 Hz
Inlet pressure max. 1.5 bar
Switch-on pressure 1.5 bar to 2.7 bar
Switch-off pressure min. 2.2 bar
Fluid temperature +5 °C to +35 °C
Operating pressure max. 8 bar
Protection class IP 44
Pressure-side connection R 1
Suction-side connection Rp 1

Equipment/function
Directly flanged motor
Connection cable with plug
Thermal motor protection switch
Automatic pump control
Low-water cut-out switchgear

Materials
Pump housing stainless steel 1.4301
Impeller made of Noryl
Shaft made of 1.4028 / 1.4404 stainless steel (1.1 kW)
Mechanical seal made of carbon/ceramic
Stage chambers made of Noryl
Pressure monitor housing made of nylon PA6
Seal made of NBR

Scope of delivery
Pump
Wilo-FluidControl pump control
Installation and operating instructions

Accessories
Protection against low water level:
Float switch WAEK 65 with small switchgear (only for EM version),
Float switch WA 65,
SK 277 with three submersible electrodes,
Pressure switch WVA,
System switching:
Float switch WAO 65,
Float switch WAO EK 65 with small switchgear (only for EM version).

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

 

KSB - Etanorm

 

 

 

 

Etanorm modularDesign
The KSB Etanorm is Horizontal, long-coupled, single-stage volute casing pump with ratings and main dimensions to EN 733 in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Design to ATEX.
Applications
Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.

 

Overview of technical data
Type of bearing Ball bearings
Casing partition Radially split
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection IP 55
No. of impeller entries Single entry
Impeller material (EN standard) 1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A 48 CL 35B;LTB2
Type of installation Long- coupled
Type of coupling Direct
Type of lubrication Grease / Oil lubrication
Max. permissible fluid temperature 140 °C
Nozzle position End suction
Maximum rated pressure (discharge) 16 BAR
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) C45; 1.4462
Standard EN; EN / ANSI
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Radial; Multi-vane impeller;Closed;Closed / Radial
Type of connection Flange
UNSPSC classification 4015150300
Casing material (EN standard) 1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A 48 CL 35B;JS1030 / A536 GR 60-40-18
eClass assignment 00000000; 36410000;36410101;36410100
Maximum head 160, 00 m
Minimum head 3, 00 m
Installation position Horizontal
Shaft seal type Mechanical seal; Gland packing
Main applications Oil / Gas;Waste water / sewage;Water;Building services;Energy;Industry and process engineering
Casing material Cast iron; Chrome nickel steel;Cast stainless steel;Nodular cast iron;Bronze
Maximum discharge-side pressure 16 bar
Type of installation Stationary
Maximum flow rate 660 m³/h
Minimum flow rate 1, 50 m³/h
Maximum speed of rotation 4. 400 1/min

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

EBARA-VERTICAL IN-LINE CENTRIFUGAL PUMPS-LPDA

 

 

 

EBARA VERTICAL IN-LINE CENTRIFUGAL PUMPS LPDA

Print project(2)Feature
– Compact and lightweight.
– Easy removal and maintenance, BPO ( Back pull out) system allows all rotating
elements to be removed without disconnecting suction and discharge pipe work.
– Suction and discharge flanges being of the same diameter and arranged opposite each
other can be directly mounted into the pipe work.
– Non-overload design to ensure stable performance for all applications.
– Wide range application with flow capacity up to 10 m3/ min.
– Higher working pressure up to 16 bars.

SPECIFICATIONS
Description Standard
Liquid handled
Type of Liquid : Fresh Water
Temperature : 0 ~ 100 0C
Max. Positive suction pressure : 10 bar
Max. Discharge pressure : 16 bar
Approximation speed : 1450 min-1
Location : Indoor / Outdoor
Covering Range
Suction Dia. : 100 to 200 mm
Flow rate : 24 to 600 m3/ h
Power : 1.5 to 75 kW
Construction
Pump Type : Inline
Casing split : Vertical back pull out
Impeller : Enclosed
Shaft seal : Mechanical Seal
Shaft : Stub Shaft
Sealing : Self flushing
Material
Casing : Cast Iron
Impeller : Bronze
Shaft : SUS 304 stainless steel
Mech. Seal : Ceramic/ Carbon
Motor Casing : Aluminum
Flanges
Suction : DIN PN-16
Discharge : DIN PN-16
Motor :
Type : IEC Standard, Flange Mounted type
No. of pole
Synchr. Speed : 4
Insulation class : 1500 min-1
Protection : F
Volt/ Phase/ Hz : IP 54 / IP 55
380V / 3 Phase / 50 Hz

Specification
Size : 100
Model : 100LPD4GA
Output ( Kw) : 1.5
Motor Frame Size : 90 L
Weight ( Kg) : 70

Specification
Size : 100
Model : 100LPD4GA
Output ( Kw) : 2.2
Motor Frame Size : 100 L
Weight ( Kg) : 80

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Pages:« Prev123456Next »