You are here: Distributor Pompa Air»Water Supply

Water Supply

Water Supply

Grundfos - SP-Submersible Pumps

 

 

Grundfos SP submersible pumps

Grundfos SP8_93Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives, motor burnout protection, and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications

The pumps are suitable for:

  • Groundwater supply to waterworks
  • Irrigation in horticulture and agriculture
  • Groundwater lowering
  • Pressure boosting
  • Industrial applications.

 

Features and benefits

  • State-of-the-art hydraulics provide high efficiency and low operating costs
  • 100 % stainless steel inside and outside
  • Sand resistant
  • Resistant to aggressive water
  • Motor burnout protection
  • Dry-running protection
  • Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.
  • High efficiency
  • Corrosion-resistant
  • Complete range of pumps and motors

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Tsurumi-MG Series

 

 

Tsurumi MG Series

Tsurumi_curve_MG

Foreign matter is finely ground up by the built-in grinder mechanism and discharged by a vortex impeller.Tsurumi submersible grinder pumps utilize a grinding mechanism in the suction port to crush foreign matter into fine particles before discharging the waste.

MG Series Features

  • Semi-vortex high chrome impeller
  • High chromium grinder mechanism
  • Ideal for small scale sewage systems

Grinding mechanism
The pump has a grinding mechanism at the suction port, and it grinds solids finely operation. The grinder is made of chromium iron casting and is highly resistant to abrasion. Vortex impeller is used to reduce clogging. Four stage rotating cutter head fitted inside a fluted stationary shredding ring.

 

 

  • OIL LIFTER (patent pending)
  • The OIL LIFTER stabilizes the function of the mechanical seal. It increases the life expectancy of the seal and extends the maintenance cycle.
  • Dual inside mechanical seal
    The pump is furnished with a dual inside mechanical seal located completely in an oil chamber. This seal system does not rely on the pumped media for the lubrication and cooling, which increases the reliability of the sealing.
  • Anti-wicking cable entry
    The pump has a rubber moulded anti-wicking clock at the cable entry section of the pump. This unique feature protects the motor from the ingress of water that may be caused by damage to the sheath of the cable.
  • Guide rail fitting version
    Guide rail fittings readily connect/disconnect the pump to/from the piping system only by lifting up and down the pump, allowing easy maintenance and inspection without the need to enter the sump. Pumps in this version have a ‘TOS’ identifier on top of their model codes.
  • Motor Protection
    A circle thermal protector (CTP) is installed in its motor. It automatically stops the motor in the event of an excessive heat build up in the motor, caused by blockage of the impeller or by other overloading factors.

MG Series   Tsurumi Pump

 

 

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

 

Wilo - VeroLine-IPS

 

 

Wilo – VeroLine-IPS

Wilo-Veroline-IPs (1)Design

Glanded pump in in-line design with threaded connection or flange connection

Application

For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems

Special features / product benefits

  • Worldwide availability of the standard motors used
  • Bidirectional mechanical seal with forced flushing

Technical data

  • Permissible temperature range ‐10°C to +140°C
  • Mains connection 3~230 V, 3~400 V, 50 Hz
  • Protection class IP 55
  • Nominal diameter Rp 1 and DN 40
  • Max. operating pressure, 10 bar or 6 bar for flange connection

ype key

  • Example IPS 40 GRD
  • IPS In-line pump
  • 40 Nominal diameter DN of the pipe connection
  • GRD Mechanical seal

Special features/product advantages

  • Worldwide availability of the standard motors used
  • Bidirectional mechanical seal with forced flushing

Description/design

  • Single-stage, low-pressure centrifugal pump in in-line design with
  • Mechanical seal or stuffing box
  • Threaded or flange connection with pressure measuring connection R 1/8
  • Standard motor

Materials

  • Pump housing and lantern: EN‐GJL‐200
  • Impeller: Plastic
  • Shaft: 1.4021
  • Mechanical seal: BVEGG; other mechanical seals on request

Scope of delivery

  • Pump
  • Installation and operating instructions

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

 

KSB - MoviBOOST-boosting system

 

 

Moviboost_2-lightboxLsDriving the highest quality standards KSB now brings the new range of moviBoost; an advanced, smart, automatic pressure boosting unit with 2 to 6 high pressure pumps developed with state-of-the-art technology and the best materials to meet our customers’ growing demands.

Applicable for a wide range of appliactiosn in industry and construction, the new moviBoost series is more energy effeicient, robust and-user friendly with KSB German controller.

 

 

 

Pressure boosting in:

  • Resedential buildings
  • Hospitals
  • Offices
  • Hotels, departmental stores, industry etc.

Water supply systems for:

  • Buildings
  • Pressurized irrigation systems
  • Service water supply system in trade and industry
  • Sprinkler systems

Fire-fighting systems for:

  • Industrial plants
  • Resedential buildings
  • Departmental stores

Everything under perfect control with smart collection of components!

  1. Movitec Pumps
  2. Variable Speed Control System
  3. KSB Butterfly valves for each pump in the system
  4. Danfoss check valve for each pump
  5. RoHS Compliant KSB German Controller
  6. HMI – pump monitoring

With its world-class operating reliability and value-added features,moviBoost offers our customers the exact solution they require.

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Ebara - DML-DMLF Submersible Sewage Pumps (SINGLE-CHANNEL)

 

 

DML Submersible Sewage Pumps

Ebara_DMLWith single channel impeller and double row lower bearings, a reliable and robust pump suitable for:

Raw sewage
Treated sewage
Effluent
Storm water
Municipal or industrial drainage
Fountains and water displays

Specifications:

Motor Output:

2.2 to 22 kW (3ph) Manual only
Outlet Size: 80 to 150 mm
Flow Rates: 200 to 5000 lpm
Head: 4 to 40 m
Max Liquid temp: 40oC
Max. immersion: 8m
Max. solids: 76 mm

Specifications

˜ Pump casing: Cast Iron
˜ Impeller: Cast Iron
˜ Wear ring: Bronze
˜ Shaft: 403 Stainless Steel
˜ Motor frame: Cast Iron
˜ Fasteners: 304 Stainless Steel
˜ Mechanical seal:

Materials

Ebara_DML_1Motor Data
˜ Submersible pump with non clog single
channel impeller
˜ Maximum solids handling: 76 mm
˜ Maximum liquid temperature: 40 °C
˜ Maximum submergence: 8 m
Double mechanical seal in oil chamber,
Silicon Carbide lower faces,
Carbon/Ceramic upper faces.
˜ Quick Discharge Connectors (QDC) available
Accessories
Range
˜
˜ Discharge elbow with companion flange
(80 & 100 mm screwed, 150 mm weld on)
Cable(s): 10 m
Supply
˜
˜ 2.2 to 22 kW – 3 Phase (Manual only)
80 to 150 mm Ø discharge
˜ Air filled, dry submersible, 4 pole, 50 Hz
˜ Star-Delta (DOL for 2.2 kW)
˜ Insulation class F
˜ IP68 protection
˜ 3 Phase – 400 Volt
Single Channel Impeller – 76mm passage

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Tsurumi-BZ-Series

 

 

BZ___3_phase___50HzIncorporates a channel impeller developed exclusively for sewage pumps, ensuring the efficient transfer of suspended solids.

Tsurumi-BZ-Series Curve

Curve-Tsurumi-BZ

 

 

 

Single vane, cast iron impeller

Passes 3″ diameter solids without clogging

Class F insulation minimizes operating costs

Built-in motor protection for surge and run-dry condition

 

 

 

TSURUMI PUMP Europe   BZ   3 phase   50Hz

Silicon carbide in oil bath

Induction motor, 4 poles, IP68

Turbine oil (ISO VG32)

Insulation class F

Miniature protector

3-phase / 400V / 50Hz / d.o.l., 3-phase / 400V / 50Hz / s.d.

Grey iron casting EN-GJL-150

Stainless steel EN-X30Cr13

Rubber, 10m H07RN-F

Inside thread, JIS10K flange

Guide rail fitting “TOS” (guide support, duck foot bend,

lifting chain) / Bend and stand set for free standing types

Model

Discharge Size (in.)

Motor Output (HP)

S.S. Revolution

Voltage (V)

Weight – Freestanding (lbs.)

Weight – TOS Model (lbs.)

100BZ41.5

4

Three

2

230/460/575

21 11/16

24 13/16

100BZ411

4

Three

15

230/460/575

28 5/8

40 1/4

100BZ42.2

4

Three

3

230/460/575

21 11/16

24 13/16

100BZ43.7

4

Three

5

230/460/575

23

26 13/16

100BZ45.5

4

Three

7.5

230/460

28 3/16

36 7/16

100BZ47.5

4

Three

10

230/460/575

28 3/16

40 1/4

100BZ41.5

4

Three

2

230/460/575

21 11/16

24 13/16

100BZ411

4

Three

15

230/460/575

28 5/8

40 1/4

100BZ42.2

4

Three

3

230/460/575

21 11/16

24 13/16

100BZ43.7

4

Three

5

230/460/575

23

26 13/16

100BZ45.5

4

Three

7.5

230/460

28 3/16

36 7/16

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Wilo-Sub TWU 4

 

 

 

Wilo-TWU-4Design

Water-supply unit with submersible-motor pump, control and complete accessories.

Application

Water-supply unit for self-sufficient water supply in the domestic sector

  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water

Special features / product benefits

  • Simple assembly, installation and operation
  • Low-wearing due to floating impellers
  • Reliable motor, due to high starting torque
  • Integrated non-return valve

Technical data

  • Mains connection: 1~230 V, 50 Hz
  • Immersed operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum motor flow: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. immersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

KSB-Amacan-S

 

 

 

KSB-Amacan S

KSB-Amacan-S

Design
Wet-installed submersible motor pump with mixed flow impeller, singlestage, for installation in discharge tubes, explosion protection to ATEX II G2 T3.
Applications
Handling of water without stringy substances in irrigation and drainage pumping systems, general water supply systems, water pollution and flood control systems.

 

Overview of technical data
Type of bearing Rolling element bearings
Casing partition Radially split
Diffuser material (EN standard) 1. 4057;1.4021
Drive Electric motor
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400/ 690 V; 3~
No. of impeller entries Single entry
Impeller material (EN standard) CC480K- GS;CC333G-GS
Type of installation In- line
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40 °C
Nozzle position In- line
Pump set location Wet well
Shaft material (EN standard) 1. 4021;1.4057
Suction characteristics Non- priming
Suitable for drinking water Yes
Type of impeller Mixed flow impeller
Casing material (EN standard) JL 1040
eClass assignment 36410000; 36410106;36410100
Free passage 160 mm
Maximum head 55, 00 m
Minimum head 2, 50 m
Installation position Vertical
Shaft seal type Mechanical seal
Main applications 00; Water;Energy;Mining / Dredges
Casing material Cast iron
Maximum drive rating 1. 100 kW
Type of installation Stationary
Maximum flow rate 21. 600 m³/h
Minimum flow rate 500 m³/h
Maximum speed of rotation 1. 800 1/min

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Ebara-DCS/DCD – Horizontal Double Case Pumps

 

 

 

Multi stage, Ring section inner casing, diffuser type for refineries, sea water injection, boiler feed and other pressure service model
Ebara model DCS/DCD HORIZONTAL BARREL PUMPS
of multistage, doble case, Ring section inner casing type have been widely used in refineries, diffuser type for refineries, sea water injection, boiler feed and other pressure service for many years.

 

Many impropements have been recently made in this pump to enhance its performence.
Our modern tape controlled machines in conjuction with advanced quality control procedures insure that these pumps meet our high manufacturing standart.
Unique original design of this high performance pump provides
for superior and extended low-cost operation.
Model DCD donates doble suction impeller type.

Applications.

  • Petroleum Refineries
  • Petrochemical Industries
  • Other Chemical Industries
  • Boiler Feed
  • Liquid Gas Transfer
  • Mine Dewatering
  • Sea Water Injection For Oil-wells

Features

  • Centerline support and heavy duty design
  • Doble casing, permits removal of the inner casing.
  • Full compliance with API specifications.
  • Flexibility of design handles wide range of liquid
  • All conponents have been designed for maximum part interchangebility.
  • Low NPSH perfoormance.

FOR MORE INFORMATION   DCS-DCDtunjuk-e1352992928843

 

 

Ebara sdc_1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos-CMV

 

 

 

 

  • Overview

grundfos-CMV-1The vertical, multistage CMV pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.

The pumps are of the close-coupled type, with a mechanical shaft seal.

The Grndfos CMV pumps are available with cast-iron base and discharge part whereas the remaining wetted parts are made of stainless steel (AISI 304/DIN 1.4301).

Applications

While each Grundfos CMV pump can be customised to meet individual requirements, the pump family is designed to be used in a wide variety of applications.

These include

  • Pressure-boosting systems
  • Domestic water supply systems
  • Cooling systems
  • Air-conditioning systems
  • Horticultural irrigation systems
  • Small industrial applications.

grundfos-cmv-325131_6bFeatures and benefits

  • Compact design
  • Modular design/customised solutions
  • High reliability
  • Low noise level
  • High-performance hydraulics
  • Grundfos motor

 

 

 

 

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Pages:« Prev123456Next »