You are here: Distributor Pompa Air»Water Supply

Water Supply

Water Supply

UZ Series

 

 

Tsurumi_UZ_seriesFeatures a vortex impeller and wide pump casing interior, effectively pumping and discharging water containing solids and fibrous foreign matters.

 

 

 

 

 

 

 

 

 

 

 

UZ_curve_ALL2 (1)

 

Recessed vortex impeller

Wide pump casing

Dual silicon carbide faced seals eliminate spring failure due to corrosion or abrasion

High tensile stainless steel shaft to handle full load operation

Oil lifter to maintain seal face lubrication when oil falls below rated volume

Model

Discharge Size (in.)

Motor Output (HP)

S.S. Revolution

Voltage (V)

Weight – Freestanding (lbs.)

Weight – TOS Model (lbs.)

100UZ411

4

15

1800

208/230/460

403

379

100UZ43.7

4

5

1800

208/230/460

174

154

100UZ45.5

4

7.5

1800

208/230/460

323

299

100UZ47.5

4

10

1800

208/230/460

342

317

50UZ41.5

2

2

1800

208/230/460

115

110

80UZ41.5

3

2

1800

208/230/460

146

123

80UZ411

3

15

1800

208/230/460

378

374

80UZ42.2

3

3

1800

208/230/460

146

126

80UZ43.7

3

5

1800

208/230/460

159

139

80UZ45.5

3

7.5

1800

208/230/460

288

278

80UZ47.5

3

10

1800

208/230/460

304

294

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

WILO - FAS 50-80 - Submersible sewage pump in stainless steel

 

 

 

Designwilo-FAS_50-80_curve

Submersible sewage pump in stainless steel construction for wet installation

Application

  • water drainage in industry
  • sewer system, single-family and multi-family house drainage
  • water drainage for chemical, pharmaceutical and metal processing

Special features / product benefits

  • including dry motor, double mechanical seal, motor protection switch
  • Viton O-rings fro a longer service life
  • pump housing in stainless steel
  • acid-resistant silicon carbide seals
  • smooth surface due to precision casting process

Technical data

  • Discharge diameter DN50~ DN80
  • solid passage 30~35 mm
  • motor power 0.4kW~3.7kW; 2pole
  • 1~230V and 3~400V

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Ksb-Etaline-R

 

 

 

 

KSB-Etaline-RKsb-Etaline-R

Design
Vertical close-coupled, in-line circulator pump with volute casing and standardized motor.
Applications 
Hot water heating systems, cooling circuits, air-conditioning, water and service water supply systems, industrial recirculation systems.

 

 

Overview of technical data
Type of bearing Ball bearings
Casing partition Radially split
Drive IEC standardized motor, electric motor
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400 V, 3~
Impeller material (EN standard) 1. 4408;CC480K-GS;JL1040
Type of installation Close- coupled
Type of coupling Direct
Type of lubrication Oil lubrication
Max. permissible fluid temperature 140 °C
Nozzle position In- line
Maximum rated pressure (discharge) PN25
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1. 4057;C45
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Flange
Casing material (EN standard) JL1040; JS 1025
eClass assignment 36410000; 36410100;36410101;36410105
Maximum head 97, 00 m
Installation position Horizontal or vertical
Shaft seal type 00
Main applications Industry and process engineering; Water;Building services
Casing material Carbon steel
Type of installation Stationary
Maximum flow rate 1. 900 m³/h
Minimum flow rate 60 m³/h
Maximum speed of rotation 1. 750 1/min

 

 
EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Ebara-End suction-FS

 

 

FS_Ebara_1-Ebara-end suction FS Series

 

 

 

 

 

 

 

 

Curve FS_1More information FS

 

 

 

 

 

 

 

 

 

 

 

 

 
EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Grundfos-NKE-NKGE

 

 

 

Grundfos CurveGrundfos NKE/NKGE

pumps are long-coupled pumps equipped with a motor with built-in frequency converter

Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications demanding reliable and cost-efficient supply. End-suction pumps are used in five main fields of applications: Water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.

NKE/NKGE pumps are long-coupled pumps equipped with a motor with built-in frequency converter and the necessary application software to achieve an all-in-one solution enabling electronic speed control. Electronic speed control enables continuously variable control of motor speed which again enables adaptation of the performance to a given requirement.

The NKE pump lives up to the EN733 standard and the NKGE pumps lives up to the ISO2858 standard. The range for motors with built-in frequency converter goes up to 22 kW.

Although NBE/NBGE pumps are more compact and therefore fit into confined spaces, the NKE/NKGE end-suction pumps with a spacer coupling are easier to service.

Main product characteristics

  • Spacer coupling making service possible without dismantling the motor from the base plate
  • Optimised hydraulics in housing and impeller = unimpeded liquid flow
  • O-ring seal between pump housing and cover = no risk of leakage
  • Housing, impeller and wear ring in different materials = improved corrosion resistance, no sticking elements
  • Closed bal bearings = correct lubrication, no dust instruction
  • Back pull-out design for easy dismantling in case of service
  • Pump is electro coated to increase corrosion resistance
  • Available with eff1 motors
  • Available in a number of shaft seal and material variants
  • PN 10 and 16 bar.
  • Temperature up to 140C
  • Energy saving

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Wilo-Comfort CO-/COR-Helix V/CC

 

 

 

 

Wilo CurveDesign

Highly efficient, ready-for-connection water supply unit (non self-priming) with 2 to 6 vertically arranged glanded stainless steel high-pressure multistage centrifugal pumps from the Helix V series connected in parallel, including Comfort Controller CC (available with and without frequency converter).

Application

  • Fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems.
  • Pumping of potable water, process water, cooling water, fire water (apart from fire-extinguishing systems in accordance with DIN 14462) or other water mixtures that do not attack the materials used chemically or mechanically and do not contain abrasive or long-fibre constituents

Special features / product benefits

  • Heavy-duty system with Helix V series stainless steel high-pressure multistage centrifugal pumps for all requirements contained in DIN 1988 (EN 806)
  • High-efficiency pump hydraulics in conjunction with IE2 standard motors
  • Hydraulics of entire system are pressure-loss optimised
  • 2- 6 vertically arranged Helix V series high-pressure multistage centrifugal pumps switched in parallel
  • Easy-to-use controller CC, with expanded functions, memory-programmable microcomputer control and graphics-ready touchscreen, menu-prompted input of operating parameters, available with or without frequency converter for stepless control of base-load pump
  • Customised units on request

 

Wilo-boster_0Technical data

  • Mains connection 3~230 V / 400 ± 10%, 50 Hz
  • Fluid temperature max. 50°C (70°C optional)
  • Operating pressure 16 bar (25 bar optional)
  • Inlet pressure 10 bar
  • Nominal connection diameters on discharge side R 1½ ‐ DN 200
  • Nominal connection diameter on the intake side R 1½” – DN 200
  • Nominal speed 2850 rpm
  • Protection class IP 54 (control device CC)
  • Fuse on mains side AC 3 according motor power and EVU regulations
  • Approved fluids (other fluids on request):
    • Potable water and secondary hot water
    • Cooling water
    • Fire water (wet line; for dry lines on request – comply with separate specifications of DIN 1988 (EN 806) and of fire-protection authorities.)

    Note on fluids: Approved fluids are generally water mixtures which do not chemically or mechanically attack the materials used and do not contain either abrasive or fibrous matter

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

KSB-Hya-Eco VP

 

 

KSB-Hya-EcoDesign

KSB-Hya Eco VP Fully automatic package pressure booster system, with 2 to 3 vertical high-pressure pumps and continuously variable speed adjustment of each pump for fully electronic control of the required supply pressure, with two standard volt-free changeover contacts for fault indication. Configuration and functions to DIN 1988, Part 5. Automated with BoosterControl and PumpDrive.

Applications
Building service, Residential buildings, hospitals, office buildings, hotels, department stores, industry, and other applications.

 

Overview of technical data
Type of coupling Direct
Pump set location Dry installed
Casing material (EN standard) 1. 4301
Maximum head 100, 00 m
Maximum inlet pressure 6 bar
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Water;Building services
Maximum drive rating 7, 50 kW
Type of installation Stationary
Maximum flow rate 70 m³/h
Maximum speed of rotation 2. 850 1/min
Standby pump Yes
Type of connection Direct
Operating mode Cascade and variable

 

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

EBARA - EVM

 

 
Screenshot_1APPLICATIONS
• Civil, Industrial, farming, fire-fighting, boosting systems
• Water treatment plants (reverse osmosis, filtrations)
• Irrigation system
• Washing system
• Movement of hot and cold water for heating, cooling and air-conditioning system.
• Boiler feeding
• Movement of moderately aggressive chemical liquids without solids.
MATERIALS
• Impeller, diffusers, casing cover, outer casing, shaft sleeve, coupling covers,
fixing in contact with liquid: AISI 304 stainless steel
• Bottom casing: AISI 304 stainless steel (EVM) – cast iron (EVMG),
AISI 316L (EVML)
• Motor bracket and base: cast iron (not in contact with the pumped liquid)
• Bearings (in contact with liquid): tungsten carbide
• Mechanical seal: Silicon carbide/carbon/Viton
• Shaft: AISI 316 stainless steel
• Tie rods and fixings not contact with liquid: zinc coated stainless steel

EBARA Corporation was established in 1912 as a pump manufacturer and today EBARA is the world’s foremost manufacturer
of pumps and pump system. EBARA is proudly presenting Vertical Multi-stage pump type EVM, manufacture with great
experience of EBARA in design and production of stamped stainless steel pumps. EBARA EVM pumps offer technically advance

 

Screenshot_3designs to meet most market demands, including pumping of aggressive liquid.
Two standard pump options are available to satisfy most of the market requirements:
– EVM(G): Bottom casing in cast iron, other liquid contact parts in SS304 stainless steel for general
water supply usage
– EVM(L): All wetted contact parts in SS316 stainless steel for aggressive liquid pumping operation.
Optional materials available upon request: All wetted contact parts in SS304 stainless steel for industrial
pumping applications.

 

 

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

Grundfos Hydro Multi-E - Booster set

Hydro multi-EHydro Multi-E is an innovative pressure booster system specially designed for building service applications.

As standard, Hydro Multi-E booster sets consist of two to four identical CRE pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

The control of the booster set builds on the master and slave principal where one pump is the master pump and where the other pumps act as slaves.
Hydro Multi-E booster sets are supplied as complete, pre-assembled and thoroughly tested booster sets, ready to install. The set point is easily adjusted via the Grundfos R100 remote control or from the control panel. The advanced control takes care of other adjustments to maintain constant pressure and optimum comfort.

Hydro Multi-E is built on Grundfos CRE pumps, known for their extremely high efficiency and reliability. The speed-controlled motors provide unique control functionality, which increases the comfort of the user and decreases operating costs. High quality materials are used throughout.

Benefits:

  • Extreme high reliability and efficiency
  • Perfect adaptation to demand
  • Constant pressure
  • Small foot print
  • Simple to use
  • Turnkey booster set ready for installation – plug ‘n’ pump unit
  • Hygienic designed manifolds

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

KSB - Etanorm - SYT

 

KSB_Etanorm_SYT

DesignKSB-Etanorm SYT Horizontal, long-coupled volute casing pump in back pull-out design with ratings and main dimensions to EN 733, single-stage, with replaceable casing wear rings. Design to ATEX.

Application

Heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation (DIN 4752).

Etanorm SYT thermal oil pumps

Overview of technical data
KSB-Etanorm SYT
Type of bearing Rolling element and plain bearings
Casing partition Radially split
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor, turbine
Drive voltage Low voltage
No. of impeller entries Single entry
Impeller material (EN standard) GJL- 250;JL 1040
Type of installation Long- coupled
Type of coupling Direct
Type of lubrication Grease / Oil lubrication
Max. permissible fluid temperature 350 °C
Nozzle position End suction
Maximum rated pressure (discharge) PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1. 4021.05 HRC 55
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Radial
Type of connection Flange
Casing material (EN standard) GJS- 400-15;GJS-400-18-LT;JS 1025;JS 1030
eClass assignment 36410000; 36410100;36410101
Maximum head 102, 00 m
Minimum head 3, 00 m
Installation position Horizontal
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Building services;Oil / Gas
Casing material Nodular cast iron
Maximum discharge-side pressure 16 bar
Type of installation Stationary
Maximum flow rate 740 m³/h
Minimum flow rate 1 m³/h
Maximum speed of rotation 3. 500 1/min

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Pages:« Prev123456Next »