Booster Systems

EBARA PRESSURE BOOSTER UNIT U N Type

 

 

EBARA PRESSURE BOOSTER UNIT U N Type

 

FEATURES

1. Featuring of variable speed control by inverter

Ebara-Booster-UN-FSAVariable speed drives are used since they can adjust the
motor’s power to fit specific needs, resulting in reduced
energy consumption and in increased savings.

2. Constant estimated terminal pressure control

The controller provides CETP (Constant estimated
Terminal Pressure) control that adjusts pump discharge
pressure in relation to pressure loss caused by pipe
resistance according to water flow. Thus, it can hold
down electric power consumption compared to constant
discharge pressure control with variable speed operation

 

3. Stable water supply

Pumps are in parallel operation for high demand and In
the event of pump/inverter fault, the controller
automatically activates another pump to assure water
supply without stopping system operation.

 

4. Compact layout

Ebara-Booster-UN2SLayout is very compact. All components are integrated on a
rugged steel base. It is ready for use by only connecting
with supply piping and to the power source. It occupies
lesser space and requires easier installation than
conventional units.


5. Extend the life of pump

Pumps are operation in automatic alternate parallel to
extend the life of the pumps.


6. Simple and compact inner control panel

Simple wiring by using RS485 digital communication can
reduce control panel dimension to be a compact design.

 

Selection Chart Model UN2M/S – CDX, 2CDX and 3S Pump

Curves_Ebara_booster_UNP

 

 

 

 

 

 

APPLICATION

1. Domestic : High-rise buildings, Condominiums, Apartments etc.
2. Commercial : Office buildings, Hotel, Shopping centres etc.
3. Industrial : High-rise factory, Manufacturing & processing industries applications etc.
4. Social service : School, Hospitals etc.

 

More Information – Ebara-Booster UNP

 

EBARA            GRUNDFOS             KSB            WILO           TSURUMI

 

KSB - MoviBOOST-boosting system

 

 

Moviboost_2-lightboxLsDriving the highest quality standards KSB now brings the new range of moviBoost; an advanced, smart, automatic pressure boosting unit with 2 to 6 high pressure pumps developed with state-of-the-art technology and the best materials to meet our customers’ growing demands.

Applicable for a wide range of appliactiosn in industry and construction, the new moviBoost series is more energy effeicient, robust and-user friendly with KSB German controller.

 

 

 

Pressure boosting in:

  • Resedential buildings
  • Hospitals
  • Offices
  • Hotels, departmental stores, industry etc.

Water supply systems for:

  • Buildings
  • Pressurized irrigation systems
  • Service water supply system in trade and industry
  • Sprinkler systems

Fire-fighting systems for:

  • Industrial plants
  • Resedential buildings
  • Departmental stores

Everything under perfect control with smart collection of components!

  1. Movitec Pumps
  2. Variable Speed Control System
  3. KSB Butterfly valves for each pump in the system
  4. Danfoss check valve for each pump
  5. RoHS Compliant KSB German Controller
  6. HMI – pump monitoring

With its world-class operating reliability and value-added features,moviBoost offers our customers the exact solution they require.

 

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI

Grundfos Hydro Multi-E - Booster set

Hydro multi-EHydro Multi-E is an innovative pressure booster system specially designed for building service applications.

As standard, Hydro Multi-E booster sets consist of two to four identical CRE pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

The control of the booster set builds on the master and slave principal where one pump is the master pump and where the other pumps act as slaves.
Hydro Multi-E booster sets are supplied as complete, pre-assembled and thoroughly tested booster sets, ready to install. The set point is easily adjusted via the Grundfos R100 remote control or from the control panel. The advanced control takes care of other adjustments to maintain constant pressure and optimum comfort.

Hydro Multi-E is built on Grundfos CRE pumps, known for their extremely high efficiency and reliability. The speed-controlled motors provide unique control functionality, which increases the comfort of the user and decreases operating costs. High quality materials are used throughout.

Benefits:

  • Extreme high reliability and efficiency
  • Perfect adaptation to demand
  • Constant pressure
  • Small foot print
  • Simple to use
  • Turnkey booster set ready for installation – plug ‘n’ pump unit
  • Hygienic designed manifolds

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI

 

Grundfos CM, CME Booster

Grundfos CM, CME

 

Overview

Modern technologies have brought a high degree of comfort to people within their homes by providing a strong water supply. Grundfos offers complete tailored pressure boosting systems for domestic water supply that ensure optimal water pressure for household applications.

CM Booster, CME Booster comes in different versions:

  • CME Booster
  • CM Booster PM2
  • CM Booster PM1
  • CM Booster PT
  • CM Booster PS

 

The Grundfos CME Booster provides constant water pressure for a variety of domestic applications. This means that the end-user is no longer bothered by fluctuations in water pressure due to a rise or fall in demand, or from pump starts and stops. CME Booster keeps the pressure within the home up regardless of usage. The constant pressure feature provides the benefit of increased comfort.

In addition the CME Booster makes it possible to personalise the water pressure. By the touch of a button the pressure level is increased or decreased as desired.

Features

  • Constant pressure via integrated speed control
  • Compact
  • Robust, stainless steel
  • Easy installation
  • Dry-running protection
  • Low noise, 55 dB

Grundfos has taken the mystery out of controlling variable water pressure for the end-user. With a CM Booster PM2 complex operation and cryptic parameters are a thing of the past. The CM Booster combined with the PM2 provides adjustable pressure settings. The end-user is in control with regards to selecting the water pressure he prefers for pump start-up.

Features

  • Grundfos CM Centrifugal ModularCompact
  • Easy installation
  • Automatic resetting of alarms
  • Adjustable pressure settings
  • Dry-running protection
  • Anti cycling (leakage detection)
  • Maximum continuous operating time

The Grundfos CM Booster PM1 is a compact booster set for water supply in domestic applications. The pressure booster consists of a Grundfos CM pump and a Grundfos Pressure Manager PM1. The pressure manager allows the pump to start and stop automatically according to demand and protects the pump from dry-running.

Features

  • Compact
  • Easy installation
  • Automatic resetting of alarms
  • Adjustable pressure settings
  • Dry-running protection
  • Anti cycling (leakage detection)
  • Maximum continuous operating time

The Grundfos CM Booster PT is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where small leakages are expected to occur.

The booster system consists of a Grundfos CM pump, a pressure tank and a pressure switch assembled into one unit.

The tank is delivered with the product and is easily connected to the CM pump. The system is now ready for use, with preset start pressure and compliant tank precharge pressure.

The pressure band is approximately 1 bar.

When the system has been connected to the pipework, it is all a matter of inserting the plug into a power supply socket, and the system is operational.

Features

  • CM pump
  • Pressure tank to minimise the number of pump starts
  • Motor protection (single-phase only)
  • Automatic operation.

The Grundfos CM Booster PS is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where small leakages are expected to occur.

The booster system consists of a Grundfos CM pump, a 5-way valve and a pressure switch. A pressure tank must be fitted to complete the booster system.

Use your own pressure tank or order one of the Grundfos GT-tanks that make a perfect fit for your booster system.

The pressure band is approximately 1 bar.

When the system has been connected to the pipework, it is all a matter of inserting the plug into a power supply socket, and the system is operational.

Features

  • CM pump
  • pressure tank to minimise the number of pump starts
  • motor protection (single-phase only)
  • automatic operation.

Applications

  • in private homes
  • in summer houses and weekend cottages
  • on farms
  • in market gardens and other large gardens.
  • Blocks of flats
  • Schools
  • Small hotels or guest houses
  • Small office buildings

The pump is suitable for pumping of potable water and rainwater.

 

EBARA               GRUNDFOS              KSB              WILO          TSURUMI


Warning: Illegal string offset 'layout' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1264

Warning: Illegal string offset 'image_url' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1583

Warning: Illegal string offset 'images_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1585

Warning: Illegal string offset 'image_desc' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1586

Warning: Illegal string offset 'video_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1587

Warning: Illegal string offset 'video' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1588

Warning: Illegal string offset 'wordtube_id' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1589

Warning: Illegal string offset 'wordtube_use_cbox' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1590

Warning: Illegal string offset 'wordtube_height' in /home/dis10007/public_html/wp-content/themes/InnovationScience2/cms/php/cp_renderer.php on line 1591

Grundfos Hydro MPC - Booster set

Hydro MPC booster sets consist of two to six identical CRI(E)/CR(E) pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

As standard, Hydro MPC booster sets consist of two to six identical CRI(E)/CR(E) pumps connected in parallel and mounted on a common base frame provided with a control cabinet and all the necessary fittings.

Hydro MPC booster sets are supplied as complete, pre-assembled and thoroughly tested booster sets, ready to install.
Most of the booster sets are available with either CR(I) pumps and/or CR(I)E pumps.

Grundfos Hydro MPC booster sets are divided into seven groups based on control variants.
Hydro MPC’s outstanding reliability and efficiency is the best possible base for our booster systems. Equipped with the intelligent CU 351 controller, the Hydro MPC boosters offer an even higher efficiency and reduced energy costs. The end result is complete control, optimum flexibility of booster output, and unbeatable efficiency at all times.
Hydro MPC booster sets are fitted with hygienic designed manifolds.

Water Supply
Grundfos Hydro MPC boosters are ideal for mains water supply systems and for pressure boosting in multi-storey buildings. The needs for water in multi storey buildings vary a lot during the course of the day – this demands much from the equipment used. With a Grundfos booster system, it is easy to provide optimum user comfort by maintaining constant water pressure at all levels and at all times.

Industry
Industries can also benefit greatly from a booster solution from Grundfos. If you require constant pressure in the face of highly variable flows, Grundfos has the solution. Even the most demanding applications will benefit from the accuracy and advanced pump control in a Grundfos Hydro MPC booster.

Irrigation
A Grundfos Hydro MPC booster system can help conserve water and optimise crop yields by responding to pre-set minimum and maximum levels. Grundfos Hydro MPC is lenient on the pipe net in golf course irrigation systems and adapts the performance automatically to any number of sprinklers at any pressure zone during the irrigation cycle. It is benefits like these that make Grundfos the perfect choice for irrigation systems.

EBARA               GRUNDFOS              KSB              WILO