Grundfos-Unilift CC - Submersible drainage pump




Grundfos-Unilift CC-modularThe Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.

The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.

The Multibox B-CC7 is an Unilift CC combined with further elements such as a hose with Storz coupling, an adaptor for threaded Storz coupling and a box with perforated-mesh sides to be used as a pre-strainer for the pump. It is the perfect solution for use as an emergency kit for single family houses in the event of flooding.



The Unilift CC is designed for the pumping of the following:

  • Water and rainwater in horticulture
  • Water from rivers and lakes
  • Rainwater, drainage water and water from flooding
  • Water for filling/emptying containers, ponds, tanks, etc.
  • Effluents from showers, washing machines and sinks below sewer level
  • Pool water
  • Ditch drainage water
  • Groundwater (lowering applications)
  • Effluents from viaducts, underpasses, etc.
  • Drainage water from garage sprinkler systems.

 Grundfos Unilift-CC-Curves

Features and benefits

  • Composite materials
  • Stainless steel strainer
  • Self-venting valve in handle
  • Available with level switch
  • Suitable for low suction levels
  • Light-weight.








EBARA            GRUNDFOS            KSB            WILO          TSURUMI

Ebara - DF - Submersible Sewage Non-clog Pumps



Ebara – DF Submersible Sewage Pumps 

Ebara-DF-Drawing copySubmersible sewage pump withnon-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrou s matter. Suitable for sewage, waste water, led lighting storm water drainage, etc. 










 Performance curves



Robust cast iron construction with non-clog semi open impeller.  Suitable for:

  • Waste water
  • Treated water
  • Effluent
  • Storm water
  • Municipal or industrial drainage
  • Fountains and water displays


Ebara Submersible pump with non-clog
semi open impeller
˜ Maximum solids handling: refer to table

Motor Output: 1.5 to 3.7 kW (3ph) Manual only
Outlet Size: 65 to 80 mm
Flow Rates: 100 to 1200 lpm
Head: 3 to 18 m
Max Liquid temp: 40oC
Max. immersion: 8m
Max. solids: 40 or 46 mm#
# depending on model


Pump casing: Cast Iron
˜ Impeller: Cast Iron
˜ Suction cover: Cast Iron
˜ Shaft: 403 Stainless Steel
˜ Motor frame: Cast Iron
˜ Fasteners: 304 Stainless Steel
˜ Mechanical seal:

˜ Air filled, dry submersible, 4 pole, 50 Hz
˜ Insulation class F
˜ IP68 protection
˜ 3 Phase – 400 Volt
˜ In built overload protection


EBARA            GRUNDFOS             KSB            WILO           TSURUMI

Wilo-Drain-TC 40


 Wilo-Drain TC 40


Submersible sewage pump


Pumping heavily contaminated fluids for

  • House/site drainage
  • Sewage disposal (the pumping of sewage containing faeces is not within the scope of DIN EN 12050-1)
  • Environmental and water treatment technology

Special features / product benefits

  • Heavy-duty hydraulic housing made of cast iron
  • Easy operation due to the attached float switch
  • Integrated stainless steel pump base for easy installation
  • Free ball passage: 40 mm

Technical data

  • Mains connection: 1~230 V, 50 Hz
  • Immersed operating mode: S1 or S3 25%
  • Surfaced operating mode: S3 25%
  • Protection class: IP 68
  • Insulation class: F
  • Thermal winding monitoring
  • Max. fluid temperature: 3 ‐ 40 °C
  • Cable length: 5 m
  • Free ball passage: 40 mm
  • Max. immersion depth: 5 m


EBARA            GRUNDFOS           KSB          WILO        TSURUMI


Ebara Pumps Right Pumps Performance Curve