Ebara-EVM-Series• Civil, Industrial, farming, fire-fighting, boosting systems
• Water treatment plants (reverse osmosis, filtrations)
• Irrigation system
• Washing system
• Movement of hot and cold water for heating, cooling and air-conditioning system.
• Boiler feeding
• Movement of moderately aggressive chemical liquids without solids.

Water treatment

• reverse osmosis systems
• distillation systems
• filtration
• light chemical applications;


Industrial washing systems

• car washing, bottle and glassware washing,
parts washing, crate washing, washing and
finishing of metal parts, vegetable washers, and
seafood washing applications
• fire-fighting systems;

Heating and conditioning

• hot water circulation
• cooling systems
• industrial boilers;
Water supply
and pressurization
• pressure boosting
• machine tools;
Agriculture and irrigation

• field irrigation
• sprinkler irrigation
• drip irrigation.


Ebara-EVM• Impeller, diffusers, casing cover, outer casing, shaft sleeve, coupling covers,
fixing in contact with liquid: AISI 304 stainless steel
• Bottom casing: AISI 304 stainless steel (EVM) – cast iron (EVMG),
• Motor bracket and base: cast iron (not in contact with the pumped liquid)
• Bearings (in contact with liquid): tungsten carbide
• Mechanical seal: Silicon carbide/carbon/Viton
• Shaft: AISI 316 stainless steel
• Tie rods and fixings not contact with liquid: zinc coated stainless steel


EVM 32-45-64 pumps mount the carridge shaft seal
All components of a cartridge shaft seal constitute a sole part on a shaft sleeve. The cartridge mechanical seal is ready to
be installed between pump shaft and motor shaft. The most important benefits of this kind of seal are:
• Easy to install
• Protected seal faces
• Safe and easy handling
We are at disposal for evaluating your specifications and needs in order to find the best solution for your plants and


• Pumps configured for the installation of a standard IEC motor
• Pumps suitable for different motor types: explosion proof, high efficiency, low noise and with integrated inverter
• 50 – 60 Hz
• 2 – 4 poles
• Motors with various voltages and frequencies
• Motors conforming to UL/CSA standards on request.


EBARA              GRUNDFOS              KSB             WILO           TSURUMI

KSB-Amarex KRT - G, G1, G2, GH

Amarex KRT with highly efficient submersible motors

With highly efficient IE3* submersible motors the pumps of the Amarex KRT® series are a true innovation on the market. KSB’s extremely energy-efficient motors can be integrated into pump stations as standard. The pump sets can be supplied with or without explosion protection

Amarex_KRT-EKSB’s in-house development work has enabled these pump sets to be mechanically and electrically optimised for the special requirements of waste water transport. The Amarex KRT motors’ electrical and magnetic design fulfils the requirements of the IE3* efficiency class up to a drive rating of 850 KW.

Combining these motors with a wide range of hydraulic systems for handling waste water enables KSB to provide pump sets offering superb efficiency and dependable operation for every application. Save energy effectively


Vertical, single-stage submersible motor pump in close-coupled design, various impeller types, for wet or dry installation, stationary and transportable version. Design to ATEX.


Handling of all types of abrasive or aggressive waste water in water and waste water engineering as well as industry, especially untreated sewage containing long fibres and solid substances, fluids containing gas / air, as well as raw, activated and digested sludge; sea water desalination.


Pump sets of installation types P and S

KSB-Amarek-KRT-Guide railare designed for continuously submerged operation. The motor is cooled by the fluid
handled on the motor surface. Operation with the motor outside the fluid handled is
possible for short periods.

Pump sets of installation type K

are suitable for continuous operation with the motor outside the fluid. Cooling is
effected by means of air convection.

Operating data

Capacity Q up to 6200 m3/h, 1700 l/s
Head H up to100 m
Motor power P2 from 0,8 kW to 320 kW
Temperature of
pumped liquid t up to 60 oC
Enclosure type IP 68 to EN 60 529 / IEC 529
additional flameproof versions ATEX II 2G T3 or T4


Three-phase asynchronous motor
400 V (variants: 230 V, 500 V, 690 V)


Standard version of cast iron
Material variants of wear-resistant chilled iron and
corrosion-resistant duplex stainless steel


Overview of technical data

Type of bearing Rolling element bearings
Casing partition Radially split
Cutter Yes
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply < 690 V, 3~
Explosion protection ATEX II 2 G T3; ATEX II 2 G T4
Impeller material (EN standard) JN 3029; JL 1040;1.4517
Type of installation Close- coupled
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 60 °C
Nozzle position End suction
Maximum rated pressure (discharge) PN 16
Pump set location Dry installed; Wet well
Shaft material (EN standard) C45+ N;1.4021
Suction characteristics Non- priming
Type of casing Volute casing
Type of impeller Open; Closed;Multi-vane impeller;Free flow impeller;Radial;Single-vane impeller;Diagonal;Cutter
Type of connection Flange
Casing material (EN standard) 1. 4517;JL 1040;JN 3029
eClass assignment 36410101; 36410103
Free passage 240 mm
Maximum head 120, 00 m
Minimum head 1, 00 m
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Energy; Water;Industry and process engineering;Mining / Dredges;Waste water / sewage;Building services
Casing material Cast iron
Maximum discharge-side pressure 12 bar
Maximum drive rating 850 kW
Type of installation 00; Transportable;Stationary
Maximum flow rate 10. 080 m³/h
Minimum flow rate 0, 60 m³/h
Maximum speed of rotation 3. 500 1/min


EBARA              GRUNDFOS              KSB             WILO           TSURUMI


KSB - Movitec A PumpDrive-vertical, high-pressure centrifugal pump


KSB-MovitecPumpDriveKSB – Movitec A PumpDrive

Multistage, vertical, high-pressure centrifugal pump in ring-section design with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design), close-coupled. ATEX-compliant version available.



Spray irrigation, irrigation, washing, water treatment, fire-fighting and pressure booster systems, hot water and cooling water recirculation, boiler feed systems etc.
6 (LHS), 45, 65

Overview of technical data

Type of bearing Plain bearings
Drive frequency 50 Hz / 60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Type of first impeller Radial
Other impeller types Radial
Type of installation In- line
Type of coupling Direct
Type of lubrication Oil / Product lubrication
Max. permissible fluid temperature 120 °C
Pump set location Dry installed
Stage casing material (EN standard) 1. 4301;1.4404
Suitable for drinking water Yes
Type of stage casing Stage casing with diffuser
UNSPSC classification 4015150300
Casing material (EN standard) 1. 4301;1.4401;JL1040
eClass assignment 36410101
Maximum head 401, 00 m
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering; Water;Building services
Casing material Chrome nickel steel
Maximum discharge-side pressure 40 bar
Maximum drive rating 45 kW
Type of installation Stationary
Maximum flow rate 75 m³/h
Maximum speed of rotation 2. 900 1/min


EBARA               GRUNDFOS              KSB              WILO          TSURUMI