Distributor Pompa Centrifugal Jakarta | Building Infrastructure https://distributorpompaair.com/product-category/ebara-pump/building-infrastructure/ Trusted Distributor of Industrial & Domestic Pumps , Service & Instalation : GRUNDFOS , EBARA , WILO , TSURUMI Wed, 02 Aug 2023 07:02:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.9 https://distributorpompaair.com/wp-content/uploads/2019/02/cropped-favicon-dpa-32x32.png Distributor Pompa Centrifugal Jakarta | Building Infrastructure https://distributorpompaair.com/product-category/ebara-pump/building-infrastructure/ 32 32 Ebara Closed Coupled and Standardized Centrifugal Pump 3 Series 2 Poles https://distributorpompaair.com/product/ebara-closed-coupled-and-standardized-centrifugal-pump-3-series-2-poles/ Thu, 20 Jul 2023 04:21:55 +0000 https://distributorpompaair.com/?post_type=product&p=114769
  • End suction centrifugal pumps built in stainless steel AISI 304 (3 Series) and AISI 316L (3L Series) in Compliance with EN 733
  • Can also work in vertical position
  • Highly resistant construction
  • Hydroforming process EBARA patent

    • [Download Brosur]

    The post Ebara Closed Coupled and Standardized Centrifugal Pump 3 Series 2 Poles appeared first on Distributor Pompa Air.

    ]]>         Ebara Submersible Pump DL/DF & DS/DVS https://distributorpompaair.com/product/ebara-submersible-pump-dl-df-ds-dvs/ Thu, 20 Jul 2023 03:58:42 +0000 https://distributorpompaair.com/?post_type=product&p=114741
  • Non-Clog Semi-Open Impellers: DL & DF
  • Full Range of Models: DL & DF
  • Efficient Semi-Open Impellers: DS
  • Strainer Prevents Blockage: DVS
  • Semi-Vortex Impeller: DVS
  • Easy Maintenance

    • The post Ebara Submersible Pump DL/DF & DS/DVS appeared first on Distributor Pompa Air.

    ]]>         Ebara Stainless Steel End Suction Volute Pump GSS https://distributorpompaair.com/product/ebara-stainless-steel-end-suction-volute-pump-gss/ Thu, 20 Jul 2023 03:39:33 +0000 https://distributorpompaair.com/?post_type=product&p=114724
  • Energy-saving Design
  • Simple Maintenance
  • Pump Specifications with High Maximum Working Pressure (up to 16 Bar) & Temperature Range -25 ~ 140 Celcius
  • International Standards (Design adopt EN733 | Mechanical Seal adopt EN12756 | Bearing Cover Plate adopt EN294)

    • The post Ebara Stainless Steel End Suction Volute Pump GSS appeared first on Distributor Pompa Air.

    ]]>         Ebara End Suction Volute Monoblock Pump GSD https://distributorpompaair.com/product/ebara-end-suction-volute-monoblock-pump-gsd/ Thu, 20 Jul 2023 03:32:53 +0000 https://distributorpompaair.com/?post_type=product&p=114714
  • Energy-saving design: World top class pump efficiency achieved, Major improvement over our previous models by impeller designed using our proprietary
  • 3D inverse design technology: Higher efficiency means lower energy consumption and motor output, and more compact size.
  • Easy installation and simple maintenance: Alignment is not required with close coupled design, Back pull-out structure enables disassembly and inspection without removal of suction and discharge piping, Shield bearings eliminate need for adding or exchanging lubricating oil. (Up to 45kW), Shaft seal flushing piping not required for the standard application, Air-bleeding not required, Simplified shaft seal and “O” ring body seal enable easy assembly.
  • Pump specifications: Maximum operating pressure: 16 bar, Liquid temperature range expansion: -10℃ to 120℃, Compatible with multiple flange standards.
  • International standards: Pump dimensions adopt EN733, Mechanical seal adopts EN12756, Protector fitted in accordance with EN294, Electric motor conforms to IEC60072-1 and IEC60034-1.

    • The post Ebara End Suction Volute Monoblock Pump GSD appeared first on Distributor Pompa Air.

    ]]>         Ebara End Suction Volute Pump GS https://distributorpompaair.com/product/ebara-end-suction-volute-pump-gs/ Thu, 20 Jul 2023 03:21:58 +0000 https://distributorpompaair.com/?post_type=product&p=114703
  • Energy-Saving Design.
  • Simple Maintenance.
  • High Performance with High Maximum Working Pressure (up to 25 Bar) & Temperature Range -10 ~ 140 Celcius
  • International Standards (Design adopt EN733 | Mechanical Seal adopt EN12756 | Bearing Cover Plate adopt EN294)

    • [Download Brosur]

    The post Ebara End Suction Volute Pump GS appeared first on Distributor Pompa Air.

    ]]>         Ebara Vertical Multistage Pump EVMS https://distributorpompaair.com/product/ebara-vertical-multistage-pump-evms/ Fri, 15 Oct 2021 08:35:26 +0000 http://distributorpompaair.com/?post_type=product&p=3002
  • Innovative hydraulic solutions: Long life of the motor bearing, High pump efficiency classified in MEI > 0.7 as the most efficient models, High pump efficiency classified in MEI > 0.7 as the most efficient models, Patent Pending, and Commercial motors can be fitted to all of the pump models without any modifications thanks to low pump axial thrust load.
  • Easy maintenance: The cartridge shaft seal enables the plug in replacement of the shaft seal without disassembling the motor bracket and The spacer coupling allows easy maintenance without having to remove heavy motors over 5.5 kW
  • Smart plug solutions: Air ventilation plug, Water filling & sensor plug, Commercial sensor fitting, Measurements for suction and discharge pressure / drain, and Two priming plugs are on both sides of motor brackets for EVMS32-90. A ventilation plug is integrated with one priming plug.
  • Stainless steel tie rods: Tie rods in EN 1.4057 (AISI 431) as standard.
  • Shaft seal solutions: Shaft seal material: B: Resin impregnated carbon graphite Q: Sintered silicon carbide Qg: Silicon carbide with carbon graphite Carbon or graphite inclusions with silicon carbide can be used as dry lubricant to reduce friction, It’s conforming to EN12756 (ex DIN 24960).
  • Piping connection options: The various pipe connections are available depending on the application requirements and The external dimensions can be adjusted to the replacement of the existing pump in the wide majority
  • EBARA standard motor solutions: • IE3 efficiency for both 50 and 60 Hz* operation, according IEC 60034-30 standard. • ETM motors are available from 0.75 up to 11 kW for both 50 and 60 Hz** • PTC sensors (thermistors) are standard from 1.5 kW upwards for motor protection at 150°C • Unloosable screws and sealing are standard for terminal box fixing from 0.75 kW upwards • Stable inverter mounting on fan covers made of pressed steel
  • Vertical multistage centrifugal electric pumps available in various versions: cast iron (EVMG), AISI 304 stainless steel (EVM), AISI 316 stainless steel (EVML)
  • Reliable, strong, silent and easy to service
  • The EVM pumps can be coupled with standard IEC motors
  • They offer state-of-the-art technical solutions
  • The EVM vertical multistage pumps (hydraulic parts) are in compliance with the 94/9/CE Directive on ATEX products (they belong to Group II, Category 2), zones 1 and 2, temperature class T2 and T4
  • Oval counter-flanges, "N" version, already included
  • Round counter-flanges, "F" version, as accessories
  • Version with WRAS approval for standard version of EVM 3-5-10-18.

    • The post Ebara Vertical Multistage Pump EVMS appeared first on Distributor Pompa Air.

    ]]>         Ebara End Suction Volute Pump FSA / FS https://distributorpompaair.com/product/ebara-end-suction-volute-pump-fsa/ Fri, 15 Oct 2021 03:58:41 +0000 http://distributorpompaair.com/?post_type=product&p=2915
    • Easy removal and maintenance, BPO (Back Pull Out) system allows all rotating elements can be removed without disconnecting suction and discharge pipe work.
    • Top centreline discharge, foot support under casing for maximum resistance due to misalignment and distortions from pipe loads.
    • Non-overload design to ensure stable performance for all applications.
    • Wider range application with flow capacity up to 22 m3/min.
    • Higher working pressure up to 30 bar.

    [Download Brosur]

    The post Ebara End Suction Volute Pump FSA / FS appeared first on Distributor Pompa Air.

    ]]>         Ebara Closed Coupled and Standardized Centrifugal Pump 3 Series 4 Poles https://distributorpompaair.com/product/ebara-closed-coupled-and-standardized-centrifugal-pump-3-series/ Thu, 25 Feb 2021 10:28:34 +0000 http://distributorpompaair.com/?post_type=product&p=2967
  • End suction centrifugal pumps built in stainless steel AISI 304 (3 Series) and AISI 316L (3L Series) in Compliance with EN 733
  • Can also work in vertical position
  • Highly resistant construction
  • Hydroforming process EBARA patent

    • [Download Brosur]

    The post Ebara Closed Coupled and Standardized Centrifugal Pump 3 Series 4 Poles appeared first on Distributor Pompa Air.

    ]]>         Ebara Mono block End Suction Volute Pump FSDA https://distributorpompaair.com/product/ebara-mono-block-end-suction-volute-pump-fsda/ Wed, 31 Jul 2019 17:58:03 +0000 http://distributorpompaair.com/?post_type=product&p=2939
  • Easy removal and maintenance, BPO (Back Pull Out) system allows all rotating elements can be removed without disconnecting suction and discharge pipe work.
  • Top centerline discharge, foot support under casing for maximum resistance due to misalignment and distortions from pipe loads.
  • Non-overload design to ensure stable performance for all applications.
  • Wider range application with flow capacity up to 12 m3/min.
  • Higher working pressure up to 16 bar.

    • [Download Brosur]

    The post Ebara Mono block End Suction Volute Pump FSDA appeared first on Distributor Pompa Air.

    ]]>