Grundfos-NKE-NKGE
Grundfos NKE/NKGE pumps are long-coupled pumps equipped with a motor with built-in frequency converter Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications demanding reliable and cost-efficient supply. End-suction pumps are used in five main fields of applications: Water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, […]
KSB-Hya-Eco VP
Design KSB-Hya Eco VP Fully automatic package pressure booster system, with 2 to 3 vertical high-pressure pumps and continuously variable speed adjustment of each pump for fully electronic control of the required supply pressure, with two standard volt-free changeover contacts for fault indication. Configuration and functions to DIN 1988, Part 5. Automated with BoosterControl […]
Tsurumi BER Submersible Ejector
Submersible aspirating aerators range in size 1 HP to 7.5 HP. The BER is designed for both very high oxygen transfer and excellent mixing. Tsurumi BER best application is used in Sequence Batch Reactors were high oxygen transfer is required during the aeration cycle and when the air is shut off, mixing only during the […]
KSB – RDLO®
Design KSB-RDLO® Single-stage, axially split volute casing pump for horizontal or vertical installation with double-entry radial impeller, mating flanges to DIN, ISO, BS or ANSI. Applications Handling of raw, pure and service water as well as seawater in water treatment plants, irrigation and drainage pumping stations, in power stations, fire-fighting systems, shipbuilding and the […]
KSB – Etanorm – SYT
DesignKSB-Etanorm SYT Horizontal, long-coupled volute casing pump in back pull-out design with ratings and main dimensions to EN 733, single-stage, with replaceable casing wear rings. Design to ATEX. Application Heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation (DIN 4752). Etanorm SYT thermal oil pumps Overview of technical data KSB-Etanorm SYT Type […]
Grundfos – HS Horizontal split case pumps
Overview The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework. The independent bearing housing allows for ease of […]
Wilo-SCP
Design Low-pressure centrifugal pump with Axially spilt case pump mounted on a baseplate Application Pumping heating water in accordance with VDI 2035 water/glycol mixtures, cooling/cold water and secondary hot water Applications in municipal water supply, irrigation, building services, general industry, power stations, etc. Q max. 40.000 m³/h H max. 450m Technical data Perm. temperature range […]
GRUNDFOS MTR, SPK, MTH, MTA
Overview Grundfos MTR, SPK, MTH, MTA pumps are vertical multistage centrifugal pumps designed for pumping of cooling lubricants for machine tools, condensate transfer and similar applications. The pumps are designed to be mounted on top of tanks with the pump stack immerged in the pumped liquid. Grundfos MTR, SPK, MTH and MTA pumps come with […]
KSB CHTR
Design Horizontal, high-pressure barrel-type pump with radial impellers, single-entry and double-entry, multistage, with flanges/weld end nozzles to API 610. Applications Main applications: refineries, petrochemical industry, seawater injection on offshore platforms and steam generation in power stations and industrial plants. Overview of technical data KSB PUMP KSB CHTR Barrel casing Yes Type of bearing Rolling element […]
