Grundfos-Unilift CC – Submersible drainage pump
Overview The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The […]
Tsurumi – SFQ Series Corrosion resistant pumps
Tsurumi – SFQ Series Tsurumi corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series, SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications Dimensions in mm: […]
Wilo-FLA – Multi-pump pressure boosting systems
Wilo-FLA – Multi-pump pressure boosting systems Design Pressure boosting system for fire extinguisher applications with 1 to 2 autonomous working, non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel Application For supply of fire extinguisher water from fire hose reels according to DIN 14462 […]
Grundfos Multi-R Booster set pump with variable Speed System
Grundfos Multi-R Booster set with variable Speed System Provides Variable Speed Pumping Station Grundfos R-series inverters are simple yet smart to operate as a Variable speed system controller and frequency inverters Simple operation by setting the operating pressure (set point) at SV via the up/down arrow button. The measured pressure […]
KSB – Etanorm GPV / CPV Single-stage volute casing pump,for vertical installation in closed tanks under atmospheric pressure
Design KSB – Etanorm GPV / CPV Single-stage volute casing pump, ratings to EN 733, for vertical installation in closed tanks under atmospheric pressure. Up to an immersion depth of 2000 mm. Applications Handling of neutral degreasing and phosphatizing solutions, wash water with degreasing agents, dipping paints, etc. Sectional drawing 1 Motor housing […]
Tsurumi-PN Series The main components of the PN Pump are made of 304 stainless-steel and composite resin materials
Tsurumi-PN Series The main components of the PN Pump are made of 304 stainless-steel and composite resin materials, making this an ultra-lightweight pump. Suitable for effluent applications where large solids are not likely to exist. Automatic and auto-alternating versions are available in all sizes Tsurumi-PN Series Features Watertight […]
Wilo – Series NFCH For pumping mineral or synthetic
Design Wilo – Series NFCH Single-stage low-pressure centrifugal pump mounted on a baseplate Application For pumping mineral or synthetic heat carrying fluids up to 350 °C, e.g.: in industrial processes or for power generation Q max. 1,000 m³/h H max. 90 m Technical data • Permissible temperature range up to +350 °C, dependent […]
Grundfos – SQ Ground water supply-private housing, small waterworks, small irrigation systems
Overview The Grundfos SQ 3″ submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements. The Grundfos SQ is a compact, 3″ multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ […]
KSB Amacan K – Submersible motor pump with non-clogging impeller
Design KSB Amacan K – Wet-installed submersible motor pump with non-clogging impeller, singlestage, single-entry, for installation in discharge tubes, explosion protection to ATEX II G2 T3. Applications Handling of pre-cleaned, chemically neutral waste water, industrial effluents and sewage, fluids not containing any stringy substances pre-treated […]
