Design
Ready-to-connect package single-pump or dual-pump station with PE-LLD (polyethylene) collecting tank for underground installation. Equipped with either one or two (explosion-proof or non-explosionproof) Amarex N submersible motor pumps with free-flow impeller. Collecting tank design to DIN 1986-100 and EN 752 / EN 476 / EN 1671. Automated with LevelControl.
Applications
Redevelopment of premises, sewage disposal in various sectors, joint sewage disposal for several residential units.
Commecial Building Services
Hydro MPC :
The Grundfos Hydro MPC booster systems are made to the very highest standards. Thanks to the CU 351 controller, they handle even the most difficult boosting jobs with ease and accuracy.
All components have been combined with focus on quality and efficiency. The Grundfos Hydro MPC booster systems are designed to last: sturdy, compact units with easy access to all service parts. Grundfos Hydro MPC booster systems can be used wherever additional pressure is required. Each booster model has been designed to meet specific customer demands for capacity and control.
The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.
Grundfos NK/NKG pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), irrigation and process industries.
Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.
Grundfos SEV and SE1 :
The Grundfos SEV and SE1 pumps are designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.
These two technologically very advanced series of pumps are available with efficient single-channel or SuperVortex impellers allowing for free passage of solids up to 100 mm in size. This greatly reduces the risk of clogging, and ensures maximum up-time and low operating costs.
CMV :
The vertical, multistage CMV pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.
CUE :
The CUE series are frequency converters for the speed control of a wide range of Grundfos pumps. The Grundfos CUE is the latest addition to our E-solution range of speed-controlled pump systems designed for a series of applications such as industry, building services, municipal or private water supply, wastewater and irrigation.
Grundfos CM and CME:
The horizontal multistage pump CM (=Centrifugal Modular) has been created with compactness and modularity as two of its central features, making numerous configurations possible. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter what the application. The Grundfos CM and CME pumps are non-self-priming, horizontal, multistage, end-suction centrifugal pumps.
GRUNDFOS MAGNA/UPE :
The MAGNA/UPE pumps make up a broad range of small, medium and large circulator pumps fitted with communication equipment and motors with electronic speed control based on permanent magnet (PM) and compact stator motor technology.
The MAGNA is an innovative member of the Grundfos family of high-quality circulator pumps. With a MAGNA, you can stop worrying about complicated pump settings. Simply install the pump and leave it on the factory setting, AUTOADAPT (MAGNA only).
TP, TPE :
Grundfos TP and TPE vertical in-line pumps are used in a variety of applications. The pumps are all single-stage, in-line centrifugal pumps with standard motors and mechanical shaft seals. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type.
DWK , DPK :
DWK and DPK are submersible pumps designed for dewatering and drainage applications. The cast-iron construction and the hydraulic design contribute durability and high efficiency. The differences between the DWK and DPK pump ranges lie in the discharge arrangement and the installation type. The DWK is designed with a top discharge pipe and suction strainer, and is thus more suitable for temporary installation, whereas the DPK has a side discharge and a ring-stand or auto coupling (as accessories), and is suitable for permanent installations.
For more products and information , please contact us :
PT.SUKMA Megah – Distributor of Industrial & Domestic Pumps
Komplek Ruko Bumi Fajar Indah Blok D1/39
Jalan Fajar Niaga , Bekasi 17145 Phone : +6221-88851131 , 8863471 Fax : +6221-88851210 Email : marketing@distributorpompaair.com
| Type of bearing | Ball bearings |
| Cutter | Yes |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Impeller material (EN standard) | JL1040 |
| Type of coupling | None |
| Type of lubrication | Grease lubrication |
| Max. permissible fluid temperature | 55 °C |
| Number of pumps | 2 |
| Shaft material (EN standard) | 1. 4021 |
| Suction characteristics | Non- priming |
| Type of casing | Volute casing |
| Type of impeller | 00; Free flow impeller;Cutter |
| Type of connection | clamp coupling |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | PA; PE;POLYAETHYLEN |
| eClass assignment | 36410000; 36410100;36410107 |
| Free passage | 60 mm |
| Maximum head | 39, 00 m |
| Installation position | Vertical |
| Shaft seal type | Mechanical seal |
| Main applications | Building services; Water;Waste water / sewage |
| Casing material | Plastics |
| Maximum drive rating | 4, 20 kW |
| Type of installation | Stationary |
| Maximum flow rate | 50 m³/h |
| Maximum speed of rotation | 2. 900 1/min |
