Tsurumi-TAR Submersible Air Mixer
Tsurumi-TAR Submersible Air Mixer Designed for difficult aeration applications. Axial flow impellers create a powerful and steady water flow making the TAR mixer a necessary component when dealing with difficult aeration and mixing applications. Air volume can be controlled from zero to maximum capabilities through use of a valve, making the […]
EBARA – HP – Hydro Pneumatic Booster System
EBARA Hydro Pneumatic Booster System Factory assembled water supply unit with 2 to 5 pumps parallel arranged, mounted on common base frame with common suction and discharge headers. EBARA Hydro-pneumatic booster system uses EBARA stainless steel pumps with one or more pressure tanks mounted on a common skid consisting of valves and manifolds. […]
Wilo-MultiPress FMP
Wilo-MultiPress FMP Design Non-self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Rainwater utilisation Special features / product benefits Ideal as water supply system in buildings Low-noise due to multistage design Electronic pump control All parts that come in contact with the fluid are corrosion-free Technical data Mains connection 1~230 V, 50 Hz […]
KSB-Mega
KSB-MEGA Horizontal, end suction, modified volute casing Application The GIW Mega Slurry is a high-performance, lowmaintenance slurry pump recommended for coarse or fine particles from solids laden waste water to aggressive slurries of an abrasive and/or corrosive nature.Consult factory for corrosive applications. Design Horizontal, end suction, modified volute casing pump includes three vane, open design […]
Grundfos-Aerojet
Overview The AeroJet is a self-aspirating aerator that keeps aerobic treatment processes running and also helps to avoid odour problems in wastewater storage, as anaerobic zones can be eliminated. AeroJets are a flexible way of providing both mixing and aeration with the same device. AeroJets are easy to install, operate and maintain, as they […]
Tsurumi-KRS-Series
Tsurumi-KRS-Series The cast iron construction of our KRS series extends pump life by preventing premature wear and failure from the abrasive materials found in mining, aggregate, and construction applications. Available in a variety of discharge sizes and horsepower, the KRS pumps are engineered to withstand even the most rigorous situations. Tsurumi-KRS Series-Features Discharge […]
Ebara-IFW-Process Pump (OH1)
Ebara model: IFW Design: Foot support, Radial split Single or Doubule Volute casing Full cmopliance with ISO 2858 Back Pull Out design Center top discharge (Self-venting) Max. Parts Interchangeability Application: Petrochemical Industry Chemical Industry Other Industries Rating Capacity upto 1,440m3/h (6,400 U.S.gpm) Head upto 140m (470ft) Discharg Pressure upto 16kgf/cm2 (Gauge Pressure) (230psigl […]
Wilo-Drain-TC 40
Wilo-Drain TC 40 Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site drainage Sewage disposal (the pumping of sewage containing faeces is not within the scope of DIN EN 12050-1) Environmental and water treatment technology Special features / product benefits Heavy-duty hydraulic housing made of cast iron Easy operation due to the attached float […]
KSB-AMA DRAINER
Design KSB-Amadrainer Fully floodable, vertical, close-coupled single-stage submersible motor pumps, IP 68, with or without level control, for a maximum immersion depth of 10 m. Applications Automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of underground passages, water extraction from rivers and […]
