Jl. Pahlawan No.45 Kav.2 Rempoa Ciputat Timur Tangerang Selatan

info@distributorpompaair.com

Ebara- 2GPE 3M Industrial booster sets 

TYPICAL APPLICATIONS


Ebara_2gpe-3m-dimentionThe base of the group is in galvanised steel as are the manifolds. The discharge manifold is set-up to gather any two vertical type membrane reservoirs. Two pressure switches, the electric control panel and a pressure gauge are mounted on it. On suction, each electric pump has
an isolating valve and a non-return valve, with the possibility of connection to an air supply unit and has another isolating valve in discharge mode. The electric control panel is sustained by a relevant support fixed to the base.
TECHNICAL FEATURES
The control panels control pump number one at variable speeds and automatically start any other pumps, allowing to adjust system pressure on constant values. These particulars allow to increase the level of comfort, minimise management costs and reduce all air pre-load
accumulation reservoirs to a minimum.
The typical applications of the GPE range pressure boosters with control panels are:
• Water provisioning for condominium, school, hotel hospital distribution networks etc.
• Water provisioning for industry in general
• Irrigation of gardens, parks and sports fields

FUNCTIONING PRINCIPLES

Ebara_2gpe-3m-Curves• Functioning with PRESSURE-CONTROLLER: the unit responds to the control of the pressure transducer and the speed control via the pump number one inverter, maintaining the system pressure constant
• Double functioning possibility of every pump in AUTOMATIC, MANUAL OR pump EXCLUDED mode
• Pump motors protection against overloads, missing phase over/under voltage
• Pump protection against dry running
• Inverter protection against phase breakdowns, under/over voltage, earth faults, environment overheating
• Functioning of pump number one at variable speed via the inverter; automatic start-up via electro-mechanical contactors of the other pumps
• Automatic switch-over of functioning of pump number one and any other pumps, via electro-mechanical contactors and pressure switches, if the inverter should block
• Automatic switch-over every 24 hours of the powered pumps start-up order via electro-mechanical contactors

 

 

EBARA            GRUNDFOS           KSB          WILO        TSURUMI