Efficiently collect scum.
The unique FSP scum skimmer removes floating oils and grease solids. The scum skimmings are then pumped to collection tanks for processing.
Tsurumi FSP Features
Can be adjusted to any depth below the water surface.
Designed with a jet injector suction mechanism to collect scum efficiently.
The FSP-series is a scum skimmer, incorporating a jet injector. It guarantees a stable sucking process even if water, air, and suspended matters are drawn in from water surface simultaneously.
Application
- Collecting floating scum at wastewater treatment plant
- Collecting supernatant water near water surface
Material
ø Discharge bore mm | 50mm | ||
Pumping Fluid | Temperature | 0-40°C | |
Type of Fluid | Treated sewage | ||
Pump | Compo- nents | Impeller | Vortex impeller |
Shaft Seal | Double mechanical seal | ||
Bearings | Shielded ball bearings | ||
Material | Impeller | Grey iron casting EN-GJL-200 | |
Upper casing | Grey iron casting EN-GJL-200 | ||
Lower casing | Grey iron casting EN-GJL-200 | ||
Shaft Seal | Silicon carbide in oil bath | ||
Float | Plastic | ||
Motor | Type, Poles | Induction motor, 2 poles, IP68 | |
Lubrication | Turbine oil (ISO VG32) | ||
Insulation | Insulation class E | ||
Motor Protector (built-in) | Circle thermal cut-out | ||
Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l. | ||
Material | Casing | Grey iron casting EN-GJL-150 | |
Shaft | Stainless steel EN-X6Cr13 | ||
Cable | Rubber, 10m H07RN-F | ||
Discharge Connection | Hose coupling | ||
