Ebara - DF - Submersible Sewage Non-clog Pumps



Ebara – DF Submersible Sewage Pumps 

Ebara-DF-Drawing copySubmersible sewage pump withnon-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrou s matter. Suitable for sewage, waste water, led lighting storm water drainage, etc. 










 Performance curves



Robust cast iron construction with non-clog semi open impeller.  Suitable for:

  • Waste water
  • Treated water
  • Effluent
  • Storm water
  • Municipal or industrial drainage
  • Fountains and water displays


Ebara Submersible pump with non-clog
semi open impeller
˜ Maximum solids handling: refer to table

Motor Output: 1.5 to 3.7 kW (3ph) Manual only
Outlet Size: 65 to 80 mm
Flow Rates: 100 to 1200 lpm
Head: 3 to 18 m
Max Liquid temp: 40oC
Max. immersion: 8m
Max. solids: 40 or 46 mm#
# depending on model


Pump casing: Cast Iron
˜ Impeller: Cast Iron
˜ Suction cover: Cast Iron
˜ Shaft: 403 Stainless Steel
˜ Motor frame: Cast Iron
˜ Fasteners: 304 Stainless Steel
˜ Mechanical seal:

˜ Air filled, dry submersible, 4 pole, 50 Hz
˜ Insulation class F
˜ IP68 protection
˜ 3 Phase – 400 Volt
˜ In built overload protection


EBARA            GRUNDFOS             KSB            WILO           TSURUMI

Related posts

Leave your comment

Your Name: (required)

E-Mail: (required)

Website: (not required)

Message: (required)

Send comment