Grundfos Industrial Pumps

• NB, NBG, NBE, NBGE

Grundfos end-suction pumps are used in water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.
Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications requiring reliable and cost-efficient supply. End-suction pumps are used in five main areas of application: water supply, industrial pressure boosting, industrial liquid transfer, HVAC and irrigation.

• CMV :

The vertical, multistage CMV pump has been developed with compactness and modularity as two of its central features, enabling numerous customised solutions. The pump basically consists of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter the application.

• HS :

The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipework.

• BMET System :

Grundfos BMET booster module consist of a BME and a BMT pump connected in series.
Both pumps has a Grundfos multi-stage submersible pump built into a stainless steel sleeve.
The BME pump is powered via a v-belt pulley by means of an electric standard motor. The pulley ball bearing features an automatic lubricating and cooling system.
The BMT pump is powered via a Pelton turbine and connected in series with the first pump. The BMET booster module are designed for use in reverse osmosis systems where the energy from the resulting high-pressure concentrate is recovered by the Pelton turbine.

• BMEX :

The Grundfos BMEX pump system is suitable for water treatment applications handling seawater and brackish water desalination.

Its special design to handle desalination features all wetted parts in seawater execution. For instance, all pump materials which are in contact with the seawater are made from 904L or duplex stainless steel.  In addition, the materials in contact with water in the pressure exchanger are made from duplex stainless steel and ceramic.

• SQFlex :

The SQFlex family is an environmentally-friendly water supply solution. SQFlex pumps are fitted with a permanent magnet motor which enables the efficient use of energy from nature. The pump system offers the perfect water supply solution in remote areas where water is scarce and the power supply is non-existent or unreliable.

The SQFlex solar panels and wind turbines adapt to the characteristic weather profile of any given area. A battery backup system can store the extra energy generated and take over when the energy from nature is not available.

• Grundfos NKE/NKGE 

pumps are long-coupled pumps equipped with a motor with built-in frequency converter

Grundfos end-suction pumps are multi-purpose pumps suitable for a variety of different applications demanding reliable and cost-efficient supply. End-suction pumps are used in five main fields of applications: Water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), and irrigation.

NKE/NKGE pumps are long-coupled pumps equipped with a motor with built-in frequency converter and the necessary application software to achieve an all-in-one solution enabling electronic speed control. Electronic speed control enables continuously variable control of motor speed which again enables adaptation of the performance to a given requirement.

For  more products and information , please contact us :

EBARA               GRUNDFOS              KSB              WILO