Tsurumi – BX submersible pump Explosion proof
The BX-series is the explosion–proof type of the B-series and is available for operating in an area in which an explosive atmosphere occurs occasionally. The pump conforms to the relevant EU directives and is certified by ATEX II 2 G Ex d IIB T4 standard.
Application
- Transferring sewage and wastewater to wastewater treatment plant
- Dewatering wastewater from industrial plant (e.g. petrochemical plant, etc)
- Pumping wastewater from collection sump where explosive atmosphere is likely to present
Impeller
Flame proof according to ATEX An impeller having a wide channel extending from inlet to exit,
which prevents internal clogging by
solids sucked in via the inlet.
Classification
Electric submersible pump
Explosion proof according to ATEX 94/9/EC
II 2G Ex d II B T4.
Channel impeller
Impeller passage 47mmx53mm
Suitable for waste water and liquids carrying
waste and solid matters
Electric Motor
Dry-type submersible induction motor,
Insulation class F, 4 poles, 1420 r.p.m.
Direct on line start
Voltage: 400V, 50Hz, 3-phase
Power input: 3,00kW
Power output: 2,30kW
Nominal current: 5,4A
Start current: 33,1A
Electric Cable
10m H07RN6GX1,5mm2
Motor Protection
Miniature protector in windings
(snap-action bi-metal device)
Shaft Seal
Double mechanical seal in oil bath
additional lubrication by oil lifting device
Primary Seal:
silicon carbide on silicon carbide
Secondary Seal:
ceramic on carbon
Bearings
Shielded ball bearings, maintenance-free
Material
ø Discharge bore mm | 80mm,100mm | |||
|---|---|---|---|---|
| Pumping Fluid | Temperature | 0-40°C | ||
| Type of Fluid | Municipal sewage | |||
| Pump | Compo- nents | Impeller | Non-clog impeller | |
| Shaft Seal | Double mechanical seal | |||
| Bearings | Shielded ball bearings | |||
| Material | Impeller | Grey iron casting EN-GJL-200 | ||
| Casing | Grey iron casting EN-GJL-200 | |||
| Suction Plate | Grey iron casting EN-GJL-200 | |||
| Shaft Seal | Silicon carbide in oil bath | |||
| Motor | Type, Poles | Induction motor, 2 poles, IP68, Induction motor, 4 poles, IP68 | ||
| Lubrication | Turbine oil (ISO VG32) | |||
| Insulation | Insulation class F | |||
| Motor Protector (built-in) | Circle thermal cut-out | |||
| Phase / Voltage | 3-phase / 400V / 50Hz / d.o.l. | |||
| Material | Casing | Grey iron casting EN-GJL-200 | ||
| Shaft | Stainless steel EN-X30Cr13 | |||
| Cable | Rubber, 10m H07RN6G | |||
| Discharge Connection | Inside thread, JIS10K flange | |||
| Optional Accessories | Guide rail fitting "TOS" (guide support, duck foot bend, lifting chain) /Bend and stand set for free standing types | |||
Saya sedang mencari pompa sewage subsumersible pump ex proof seperti surumi pump ex proof… Cuma saya ingin menanyakan berapa meter headnya trus capacitynya.. Untuk jenis submersible exproof selaim ini ada atau tidak?
Terimakasih atas pertanyaannya.
mohon detail spesifikasi pompa yang bapak butuhkan email ke marketing@distributorpompaair.com
akan kami tindak lanjuti
Terima kasih
admin_
Saya sedang mencari pompa sawage submersible explotion proof untuk memompa air dari bak drain tangki avtur dengan kapasitas bak drain 200 ltr dgn pipa discharge horizontal panjang kurang lebih 50 meter
Terima kasih
mohon data detilnya pak, kami sudah me reply juga lewat email bapak, terima kasih
Mohon informasi, apakah menjual pompa air semacam DAB yang gas proof?
Mohon maaf slow respond, silahkan bisa mengirimkan permintaan ke email kami di info@distributorpompaair.com 🙂
kami sedang mencari portable Water Pump explosions proof dengan spek 220vac /60Hz kapasitas 20lt/menit
Mohon maaf slow respond, silahkan bisa mengirimkan permintaan ke email kami di info@distributorpompaair.com 🙂