AeroJet :
The AeroJet is a self-aspirating aerator that keeps aerobic treatment processes running and also helps to avoid odour problems in wastewater storage, as anaerobic zones can be eliminated.
AeroJets are a flexible way of providing both mixing and aeration with the same device. AeroJets are easy to install, operate and maintain, as they do not require any blowers, air distribution piping or control valves.
The Grundfos SLV and SL1 pumps are designed to handle unscreened sewage, effluent, large volumes of surface water and process water in municipal, utility and industrial applications.
AMD-AMG-AFG :
The range covers everything from small-scale mixers, ideal for prefabricated pumping stations, to large-scale flowmakers created for large tanks and basins. Wastewater infrastructure is an obvious application area – from network stations to treatment plants – but the mixing power of the AMD, AMG, and AFG ranges is also appreciated by industry and agriculture professionals worldwide.
Grundfos S pumps form the backbone of many sewage systems. They are selected for their strength, their durability, and for innovative features such as the SmartTrim impeller clearance adjustment system and the Smart Seal for leakage prevention.
The SmartTrim system used on the S-pumps makes it easy to adjust the factory-set impeller clearance and thus to maintain maximum pump efficiency. The Grundfos SmartSeal Auto-coupling gasket provides a completely leak-proof connection between the pump and the base unit of the auto-coupling system.
Grundfos – Pust offers a full range of modular pumping stations, complete with all necessary piping, valves, level controls, etc. The range uses a modular concept and offers a large pit volume.The pump pit, pumps and controls can be combined to suit specific requirements for each individual application.
The pumping stations are made from durable polyethylene (PEHD). All pre-installed piping is either PE or stainless steel. As standard, the pumping stations are supplied with a PE top cover.The pumps are available in a variety of sizes. The standard range can be supplemented with customised versions as required.
Grundfos vertical in-line volute pumps are used in a number of applications including air conditioning and heating. The pumps are all single-stage, in-line centrifugal volute pumps with standard motors and mechanical shaft seals.
The pumps are close-coupled, meaning that the pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid compared to similar canned rotor pumps.
Grundfos SEG – Grinder Pumps
Grundfos grinder pumps (SEG) are specifically designed for areas with no sewer systems or areas where gravitation systems are unsuitable.
The high discharge pressure enables transfer of effluents and sewage over longer distances to the public sewer or sewage treatment plant.
Grundfos-Unilift CC – Submersible drainage pump
Overview
The Unilift CC is a single-stage submersible drainage pump, designed for the pumping of drain water and grey wastewater. The Unilift CC can pump down to a water level of 3 mm above the floor by removing the strainer. The Unilift CC is suitable for permanent as well as temporary installation. The Unilift CC is fitted with a non-return flap valve in the outlet in order to prevent backflow from the piping system. An adaptor ensures good connections to 3/4”, 1” or 1 1/4” outlets.
Grundfos DWK and DPK are submersible pumps designed for dewatering and drainage applications.
The cast-iron construction and the hydraulic design contribute durability and high efficiency.
- Grundfos SB and SBA
Overview
The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications and private wells. The pump is available in two versions:
SB
The Grundfos SB is a submersible pump for the pumping of clean water. It is designed for use in domestic applications. The pump itself is very silent, and when installed underground in a rainwater collecting tank or well, noise will never become an issue. The SB pump requires an external controller, like Pressure Manager, for automatic operation.
Unilift KP pumps are submersible drainage pumps suitable for both temporary and permanent free-standing installation. They can be used for pumping drain water or grey wastewater. They are also suitable for installation in collecting tanks.
Overview
The Grundfos DP pumps are designed for pumping drain water and groundwater from installations in or around private housing, farms and small industrial plants. These pumps are also ideal for flood-relief applications and as utility pumps in farming, industry, etc
Applications
DW pumps are excellent for dewatering and draining jobs. The portable design, wear resistant parts and high pressure capabilities ensure the reliability, sustained performance, user-friendliness and ease of servicing that are necessary in demanding dewatering applications at sites such as:
- Construction sites
- Excavations
- Tunnels
- Steel works
- Fish ponds
- Underground parking drainage Industrial drainage pits.
The SE range of pumps is built for years of trouble-free operation. The SE range can operate submerged or dry-installed without motor cooling, and is extremely reliable and very easy to service. The pumps can be permanently installed using an auto-coupling guide-rail system or a fixed pipe connection; the pumps are also suitable for freestanding installation or for use as portable utility pumps.
For more products and information , please contact us :
PT.SUKMA Megah – Distributor of Industrial & Domestic PumpsKomplek Ruko Bumi Fajar Indah Blok D1/39
Jalan Fajar Niaga , Bekasi 17145 Phone : +6221-88851131 , 8863471 Fax : +6221-88851210 Email : marketing@distributorpompaair.com
Saya cari Centrifugal dry pumps (open impeller atau semi) 1500 rpm
kapasitas 60 m3/h
impeller SS 304
Shaft SS/ AISI 316L
terima kasih